PG.jpg (2472 bytes)


ORDERS:
704-799-2192


BIKE SPECIFIC
PARTS PAGES
FOR NEW
'03-'13 Models
(
R1, R6, ZX-10
CBR600/1000RR,
GSX-R1000, ZX-6R
GSX-R600/750 & more)


"VIC" Repeat
Customer Discount
Program


TOP SELLERS


Ohlins Shocks,
Forks, & Dampers

 


GoPRO
HERO
3 HD




BALLISTIC EVO2 LITHIUM BATTERIES
(ULTRA LIGHT WEIGHT)


 


Antigravity Superlight
 Lithium Batteries


PRODUCT  CATEGORIES

Air Filters

Alarms

Apparel

Batteries

Bodywork

Brakes

Cameras

Carburetors

Cargo Racks

Chains / Sprockets

Chain Adjusters

Clip-ons

Clutches

Controls

Gauges / Dash

Electronics

Engine Covers

Engine Parts

Exhaust

Fairing Stay

Fender Eliminators

Fenders / Huggers

Fuel Caps / Bases

Fuel Injection

GS911 Service Tool

Hard Parts

Helmets

H.I.D Head Lights (Xenon)

Lap Timers

Levers

Mirrors / Mirror Block Off Plates

Nitrous

Oil Filters

Protection / Frame Sliders

Quick Shifters

Race Stands

Radar Detectors


Radiator Hose Kits

Rear Sets / Foot Controls

Seats / Seat Cowls

Slipper Clutch

Speedo Tuner

Sprockets / Chains

Steering Dampers

Sunglasses

Suspension

Tail Lights

Tank Traction Pads / Stomp Grip

Throttle Kits

Throttle Lock / Cruise Control

Tires

Tire Warmers

Tire Pressure Monitoring (TPMS)

Under Tails

Velocity Stacks

Wheels

Windscreens

Zombie Target

NecksGen


"VIC" Repeat
Customer Discount
Program



PG.jpg (2472 bytes)

 

 

2006 YZF R1 / LE :
For Special Offers, follow us on Twitter   &  Facebook:   Click >> << to become a Fan or Friend.
You could be one of our Lucky  $30 HardRacing e-GIFT CARDS  PRIZE  WINNERS,  Each Week..


 

    
New Parts / Updated:   08-13-14
We update these pages often. 
Be sure to hit REFRESH on your browser, each time you check this page.
Or it may Not Show the new parts.





 

  Ohlins_YA305.JPG (45237 bytes) 

Ohlins Shock BLOW OUT
Retail - $1450  SALE PRICE.. Only - $849
While Supplies last 
>> OHLINS <<
(46PRX Series)



   
GPR Dampers V1 and V4 Models starting  @ only - $319
 >> GPR SALE <<
INVENTORY BLOW OUT.



  
'06-'07  Factory Yamaha R1 SUPERBIKE    Only the Best Parts on the Planet go on these bikes
(Akrapovic Evolution 2  Exhaust w/ Ti Can.,  Ohlins Superbike Forks,  Ohlins  Shock,  Marchesini Forged Magnesium Rims,)
((Dyno Jet Power Commander IIIusb,  Dyno Jet Ignition Module,  Dyno Jet Quick Shifter,  DID Chain,  AFAM Sprockets)
(STM  Slipper Clutch,  SharkSkinz Bodywork, Galfer Wave Rotors, and a few more parts, no one knows about.) 
Every part listed here is the SAME EXACT Part, you can put on your own bike.  And we can get it for you.


 

 

Quickshifter.gif (110118 bytes) 


The All New PCIIIusb , PCV's &  Dyno Jet Quick Shifters:

Featuring: State of the Art Technology
New Mapping methods, USB Port For Easier & Faster
Transfer and Auxiliary Data Port for Future Add-ons.
Get One Now, Before they are all on Back Order

PCIIIusb   
ON SALE - $265
  DISCONTINUED  
PCV    ON SALE - $265   ( IN STOCK)

For More Details: & Buy It Now >> DynoJet Power Commanders   PCIIIusb  <<



 


Auto Tune for Power Commander V

“Auto Tune” kits are available that include Wide Band O2 sensors and control boxes. It will plug directly into the PCV and allow automatic fuel adjustments.  Auto Tune can make a map for each gear it can map each cylinder separately for each gear if needed. (basic settings would make one map for all gears)  “Warm Up” fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on it)  Each map cell is individually adjustable so you can specify an exact AFR value for each area if needed. This allows the tuner/user to select specific AFR targets for idle, cruise, and large throttle opening areas. By doing this you can automatically tune the cruise area for best fuel economy while at the same time achieve maximum power at wide open throttle.
If Dyno Jet does not have the exact map for your combination of parts you simply need to choose the closest one and let the Auto Tune kit do the rest.
(if you have an very heavily modified engine and/or short drag pipes verifying your settings on a dynamometer is recommended).

SPORT BIKE AUTO TUNE KITS  Retail :  $250    OUR SALE PRICE - $209  

>> Watch Video Installation <<


PG.jpg (2472 bytes)



 

       
The Dynojet Quick Shifter Sensors
are compatible with USB Power Commander ONLY and allow "full throttle, clutch- less" upshifts. These high quality sensors provide fast, accurate and reliable shifting in conjunction with the Power Commander. Sensors are attached to the gear linkage and connect into the Power Commander expansion port. All sensors include a Software utility which allows the user to adjust the "Kill Time" and "Minimum RPM Shift Point" within the Power Commander Control Center Software.  "Please note these are NOT Power Shifters.  They do NOT shift for you.  They allow "full throttle, clutch- less" upshifts, by cutting the Fuel or Spark  for a split second as you start to shift with your foot..   

 
Dyno Jet Quick Shifters:  ON SALE - $179  (IN STOCK)
   BUY NOW  -
>> DynoJet Quick Shifters  <<
 

For more information, please refer to the guide belo: Linkage Adapters ONLY Sold w/ Quick Shifters.(Not sold Separately)

Shift Rod Installation Guide
Pdf | Zip
Linear Sensors  are universal..
Shift Rod Sensors require the gear linkage tie-rod to be modified. We are developing a range of tie-rods for the popular models, as well as universal tie-rods that are specifically designed to give maximum adjustment, allowing a combination of different M6 right hand and left hand male and female threads over a wide range of 160mm to 280mm. This will allow easy installation on many models as well as some custom rear-set applications..


PG.jpg (2472 bytes)
 

djign.jpg (87661 bytes)    <-click
CBR1000RR Dyno Map, showing nearly 4 HP Gain, everywhere, With JUST the Ign. Module changes.
Some bike have shown gains over 8 hp, in certain areas, by simply changing the Ignition Timing.

Power Commander Ignition Module    

 

An “Add-On” Power Commander Ignition Module for Power Commander USB’s, are available NOW.
These modules will plug directly into the PCIIIUSB’s expansion port and the bike’s ignition coils. Dynojet Ignition Modules use the latest in “direct coil driver technology.” Both advancing and retarding of the ignition timing at specific throttle postion and rpm combination will be possible. In “Advanced Mode,” the tuner will be able to set the timing for each cylinder individually.
When tuned correctly, the Ignition module has potential to make excellent HP Gains Through out the RPM Range.
The Ignition Module will Also allow the User to increase his Rev. Limiter of the Bike, Enabling them to Tap the Most power
possible from the engine.
(Note, this does require a signed waiver form)
The Power Commander Ignition Module will be available for popular sport bike models. 
This does not apply to Harley Davidson model Power Commander USB’s, as they include ignition timing adjustment ability as part of the base unit..

The Dynojet Ignition Module is an “add on” accessory for select Power Commander III USB. It allows you to control and adjust the ignition timing of your motorcycles’ engine.

The Dynojet Ignition Module is connected to the PCIII USB with it’s built in expansion port link and communicates via a CAN interface. As in the case of the Power Commander, the Dynojet Ignition Module uses OEM style connectors to plug in-line of the stock ignition harness so no cutting or splicing is required.

The Dynojet Ignition Module uses “direct coil driver technology” and allows a high degree of timing adjustment. In the Power commander Control Center Software the user is able to advance or retard the ignition curve up to 10 degrees based on throttle position and RPM. It is also possible to alter the timing for each cylinder individually if necessary.
 

 The Ignition Module comes standard with no adjustments made in the map for the timing table. Due to different states of tune, fuel quality, and engine modifications we found it is best to leave the ignition timing stock for safety reasons.

On motorcycles that have eight injectors and were not previously able to benefit from the use of the Dynojet Quick Shifter, the Ignition Module now allows this functionality. The Dynojet Quick Shifter is connected to the expansion port between the Ignition Module and the PCIIIusb.
 Regular Price - $361  ON SALE - $285  IN STOCK  
Buy it Now >> DynoJet Ignition Modules  <<




ALL NEW   HARD RACING.com T-SHIRTS  &  Factory Logo HATS
Dyno Jet, Brembo, Yoshimura Logo on one sleeve
And
Akrapovic, Alpinestars, Ohlins Logo on the other sleeve.

 

   
Factory Logo Hats  (Brembo and Alpinestars)



Click for more details  >>  HARDRACING.com    T-Shirts  &  DECALS
T-SHIRTS ONLY - $5.95  /   HATS  Only - $24 
&   
HARD RACING.com DECALS -   $0.95

(Not quite Bike Specific, But they do work with all bikes)








 

 

_______________________  Sunglasses/Eyewear______________________________

 





________________________________  CHAIN KIT  ____________________________________

 


520 Chain Kits/Sprockets ($169 +) IN STOCK

 



________________________________ 
 EXHAUST  ____________________________________
 

Two Brothers Exhaust
TWO BROTHERS RACING EXHAUST

 

 


  
"The Future of Performance."
>> M4 Exhaust <<

 

 


 



Arrow Exhausts




 



>> Jardine Performance Exhausts <<




 

o4r1.jpg (261356 bytes)
> Ti-FORCE <
FULL TITANIUM  EXHAUST W/  Twin Titanium Canisters - $1699 IN STOCK
With the Purchase of this Ti-Force Full System You get a FREE PCIIIusb

              TWIN TITANIUM  SLIP-ONS - $859  IN STOCK
Kit Includes - Ti Mid-Pipes and Ti Y-Collector (Eliminates Cat.) 







photogallery/serpent.jpg
Starting at only - $1199
Micron Serpent System - IN STOCK

Micron (Twin) Slip-Ons  ($629 - $919)

2004  R1   Dyno & Torque Chart
   
Huge HP & Torque Increase Everywhere. 
And NO Dips in Power ANYWHERE.



 

 



 >> LEO VINCE <<
Slip-ons and Systems

 




logotype.gif (45340 bytes)
Slip-ons and Full Systems
>> Yoshimura <<

 



      
ALL NEW SLASH CUT CARBON END CAPS
Akrapovic Full System 
 
Akrapovic Twin Slip-Ons 
 

 


________________________________
BRAKES  _____________________________________



core moto brake line features
core moto banjo colors

CORE MOTO Stainless Steel Brake Lines Kits.
Custom made, with thousands of combinations available

>> CORE MOTO <<





   Watch Video>>  <<
Brembo RCS19  Brake Mastercylinder w/ FOLDING Lever
 (RCS 19)
The revolutionary aspect of the Brembo RCS19 Brake Mastercylinder is the ability to choose between the 19x18 and 19x20 configuration. If you have read about Brembo Master Cylinders, you will know what these numbers mean and that there is a trade-off between the two pivot configurations. Not to say that either configuration is bad, but the rider had to choose between varying degrees of feel and power. Now the rider can change the configuration to suit their needs. No more compromises!
Another unique aspect to the RCS19 is it comes with a microswitch for the brake.
For racers, the adjuster knob has been relocated to the same position as the 19x18 Billet Folding Brake Master Cylinder that is used by Valentino Rossi and Nicky Hayden in MotoGP and WorldSuperBike. Two springs have been installed to ensure constant contact between the lever and the pushrod to ensure a longer lifespan.
The Brembo 19RCS brake master cylinder retains features that made Brembo the top brake system manufacturer today including forged CNC-machined construction and a folding lever that reduces crash damage.     
PG.jpg (2472 bytes)
RCS19   Sale Price: $365      
(Order this Brembo MC on-line, and receive Free EXPRESS Shipping )

  IN STOCK




wpe8.jpg (12980 bytes)  
CRG Levers are Carved from aluminum.
They are
beautiful as well as functional.
CRG Levers are Designed to be bolt on replacements, fully adjustable.
Available in Gold or Gray. 
A few Select CRG Levers are available in a short lever version. ( 1.25" Shorter )
Learn More or Buy Now >  CRG Levers <    - $84.95 & Up  IN STOCK

 


 


Brembo ZO4 Upgraded Pads for OEM Calipers
Sale Price $123-$231
>> BREMBO <<




wpe4.jpg (8996 bytes)
BREMBO Mastercylinders - $260 + Up IN STOCK






Galfer Dble.jpg (180521 bytes)


GALFER SS BRAKE LINE
KITS ($85- $131) IN STOCK
And Brake Pads IN STOCK




 





Dion Device



 


BREMBO RSC  Yamaha Replacement Cable Clutch Lever
Mechanical clutch lever assembly machined entirely from billet. Lever boss has special geometry. Plug-and-play design ensures the lever can mount directly to the original arm lever assembly. Similar in all respects to the 19RCS Master Cylinder with laser-imprinted Brembo® Racing logo and the famous tri-color flag on the lever boss.  Perfect Match for your RCS19 Brake
RSC  Yamaha Cable Clutch Lever  
Sale Price: $169.90      
Fits These Model Bikes ONLY:  '02-'10 R1,  & '99-'10 R6



 

       
FERODO High Performance Brake Pads
Starting - $27/set
>>  FERODO <<

 



BREMBO REAR HP CALIPER
Following the latest development in Brembo’s high performance kits programme, which broadly extends the product range still further, motorbike enthusiasts are now offered a rear caliper and bracket kit interchangeable with the majority of OE assemblies fitted to Japanese and European supersport models. Machined entirely from billet, the caliper body is the outcome of exhaustive FEM calculations that optimize weight and stiffness. The caliper is supplied complete with sintered pads — currently the top option available on the market. Special care has been taken over the need to achieve optimum control of the braking action, even in conditions of poor grip that could be caused by reduction of rear wheel weight during the braking action. The kit is compatible both with OE brake master cylinders and with OE discs fitted to all main supersport bikes.
In the case of Japanese supersport bikes (SUZUKI, YAMAHA, HONDA and KAWASAKI), the kit includes an adapter bracket that drops the caliper below the rear axle — its usual position on racing machines. This helps to lower the centre of gravity of bike and rider.

Available for these Models ONLY :  '06-'07 CBR1000RR / '04-'05 CBR1000RR 
'07-'08 GSX-R1000   /   '08-'09 ZX-10  /  '06-'07 ZX-10  /  '04-'05 ZX-10
'07-'08 R1  / '04-'06 R1
HP " BILLET" REAR Caliper    Retail - $850.95
Price Includes Brembo PADS. 
Sale Price Starting at $545.90   < BREMBO PRICING >
 
 



 

ALL NEW  Brembo "M4"  CAST
MONOBLOC
FRONT CALIPERS


The newest offering from the Brembo HP line. The M4 CAST Monobloc Caliper.
Designed with an entry level cost in mind... Using
CAST Alum. Instead of Billet.
These calipers are of monoblock construction utilizing a unique gravity cast procedure.
High temperature main seals plus dust seals allow for use on street or on the track.
Caliper CAST ALUM. bodies are then CNC machined.
Brake pads made from sintered material so & are ideal for use in wet and dry conditions.
Kit includes instruction manual with all information about fitting, bleeding, maintenance and more.
108mm M4 Cast Alum. Calipers    Retail - $1098  (Except 07-08 R1)
Price Includes Brembo PADS. 
Sale Price - $999/set of 2 Calipers  
PG.jpg (2472 bytes)
To See More Information on BREMBO CALIPERS, ROTORS and MASTERCYLINDERS
>> BREMBO<<

 


ALL NEW
Brembo "HP" BILLET Brake Calipers  (2 Piece Design)
4 Piston,  2 Pad Setup.
Designed very similar to
the "Racing" Monobloc Calipers.
But, at LESS then half the Cost.
EXCELLENT Upgrade and OEM Fit.
108mm  Bolt-Hole Setup

for Most Japanese Sport Bikes, That have Radial Calipers Stock
.
Brembo has developed a new caliper with radial attachments that is interchangeable on the standard radial forks of maxisport class Japanese machines (HONDA, YAMAHA, SUZUKI, KAWASAKI). With a caliper body machined from solid metal, special attention was paid to achieving high braking power and stiffness, utilizing technology derived directly from race engineering. The product, which is supplied in kit form, is equipped with sintered brake pads - at the cutting edge of today's manufacturing technology; the kit also contains an instruction handbook, a set of Brembo decals, and a series of practical temperature stickers as used in race conditions to monitor the working temperature of the calipers. The stickers clearly identify the thoroughbred race pedigree of the brakes.

To assure that we send you the correct spacers, please let us know the make, model and year of the bike that you plan on putting these calipers on.


Retail - $1718
Sale Price $1596.50 - < BREMBO PRICING >
Price Includes Brembo PADS.
 







EBC Rotors - Starting only  $129




 

0000.jpg (16361 bytes)
GALFER  Wave Rotors ($129 + up
Ltd Qty. IN STOCK

 

 


   
  GALFER High Performance Brake PADS
>> GALFER PADS  <<

 

 

The floating rotors were developed specifically to provide owners of Japanese Sportbikes (HONDA, YAMAHA, SUZUKI, KAWASAKI) with the maximum performance levels on the street and on the track. The new rotors are available in three diameters and are of greater thickness than standard rotors. The braking surface features a series of drilled holes to maximize performance and control when braking while simultaneously reducing rotating mass with consequent advantages in terms of machine handling. The braking surface is connected to the carrier, which is machined from solid aluminum and is the product of a comprehensive FEM calculation procedure.  The connection is achieved by means of ten floating- type aluminum buttons, reflecting a strictly race style engineering project. The kit contains the two rotors, and a set of Brembo decals.
Retail - $769.95
Sale Price - $339.90/each Disc x 2

< BREMBO PRICING >
 

 



________________________________ 
BATTERIES ____________________________________
 

 


- OEM Size  Direct Replacement Lithium Batteries -



 


Anti-Gravity SuperLight
 Lithium Batteries
 






Anti-Gravity Micro Start XP1 Charger



 


BALLISTIC EVO2 LITHIUM BATTERIES
(ULTRA LIGHT WEIGHT)





Full Spectrum Power Ultra Light Weight 
"Pulse"  P1, P2, P3 Lithium. Batteries

 

 


TruGel Batteries
The Ultimate LONG Lasting Top Quality Motorcycle Battery.  PERIOD.
And Best of All, They are LESS Cost then traditional Lead/acid batteries

 


________________________________ 
CONTROLS ____________________________________

clipon.bmp (182334 bytes)
Vortex Clip-Ons - $119.95 IN STOCK









>>  CRG Carbon Fiber Clutch and Brake Levers ( Shorty or Standard)  <<





Driven D Axis Lever Guard

Driven D-Axis Lever Guard








Vortex V3 Lever Guards








DRIVEN CLip-ons -

 




Dion Device


 


BREMBO RSC  Yamaha Replacement Cable Clutch Lever
Mechanical clutch lever assembly machined entirely from billet. Lever boss has special geometry. Plug-and-play design ensures the lever can mount directly to the original arm lever assembly. Similar in all respects to the 19RCS Master Cylinder with laser-imprinted Brembo® Racing logo and the famous tri-color flag on the lever boss.  Perfect Match for your RCS19 Brake
RSC  Yamaha Cable Clutch Lever  
Sale Price: $169.90      
Fits These Model Bikes ONLY:  '02-'10 R1,  & '99-'10 R6



 

wpe8.jpg (12980 bytes)  
CRG Levers are Carved from aluminum.
They are
beautiful as well as functional.
CRG Levers are Designed to be bolt on replacements, fully adjustable.
Available in Gold or Gray. 
A few Select CRG Levers are available in a short lever version. ( 1.25" Shorter )
Learn More or Buy Now >  CRG Levers <    - $84.95 & Up  IN STOCK







Woodcraft Hand Guards



 

 

________________________________ SUSPENSION____________________________________
 

 

  
JRI Shocks and Cartridge Kits
Shocks Starting at - $874
Shock and Cartridge Kit Combos Starting - $2195

>> JRI  <<
 




 

 


Ohlins
SUPERSPORT
 FORK  VALVE  KIT
"Compression & Rebound Valves"

(For use with STOCK FORKS)

• Kit Improves Comfort & Performance of Stock Forks
• Includes NEW Compression Pistons,
Rebound Pistons, Piston Rings,
Shims, One-Way Valves, Washers, and
Recommended Track Settings
• Bolt-On Installation For ALL Stock Forks
• Recommended For "STREET or RACE"

3200-01 / FPK-xxx
-  IN STOCK
   
>> OHLINS  <<





2004 R1 Shock (142652 bytes)
Ohlins Shock
Part # YA343  (PRXLS)  
IN STOCK



 

 


Scotts Steering Damper

IN STOCK   
Please note, '06 R1 / LE  DOES require drilling (2) small 6mm Holes to mtn. the Frame bracket.
Once the kit is installed, these holes are NOT Visible. 


 

 


 

ohlinsdamper.jpg (6151 bytes)
Ohlins Steering Damper  
STOCK MTN. Location
(SD-X)
 
IN  STOCK   


 

 


>> GPR Steering Damper  <<
Retail - $475 Sale Price - $  Click  GPR  for Sale Price

Please note, '04-'06 R1  DOES require drilling (2) small 6mm Holes to mtn. the Frame bracket.
Once the kit is installed, these holes are NOT Visible. 


 

 


 >> OHLINS FORK SPRINGS  <<
(Upgrade Replacement for OEM Forks)


 



Ohlins Shock Springs  for Ohlins SHOCKS

Replacement Springs for your Ohlins Shock. 
Springs Rates available from 70N/mm up to 135N/mm

Sale Price - $89

  IN STOCK  


 

 



>> K Tech Shocks and Cartridge Kits  <<




 

RACE TECH FORK SPRINGS - for OEM Forks


Race Tech manufactures precision high performance springs that have a high stiffness to mass ration.
In other words; Race Tech Fork springs are lightweight for the their partifuclar rate.
This requires the finest materials and processing.
Race Tech OEM Replacement Fork Springs - $105 


 

 

RACE TECH SHOCK SPRINGS - for OEM Shock


Race Tech HP Springs have a high stiffness-to-mass ratio. In other words; our springs are light weight for their particular spring rate. This requires the finest materials and processing. Shot-peened and pre-set so they cannot sack out. All Race Tech HP Springs have the highest rate tolerences in the industry. These are the finest springs in the world-guaranteed.
Race Tech OEM Replacement Shock Springs - $105 





Race Tech 20mm GOLD VALVE FORK KIT FMGV2040  for OEM Forks


Race Techs original bolt-on fork valving system for cartridge forks
Triples the flow area by putting valving control on the shim stack instead of the overly restricted stock piston
Outstanding tunability, improved control, traction, plushness and bottoming resistance
Includes complete instructions, Gold Valve pistons, valving charts, and valving shims
Race Tech 20mm Gold Valve Fork Kit  for OEM FORKS  - $149 


 


________________________________ 
WHEELS ____________________________________


>> Carrozzeria Forged Aluminum Wheels <<
Starting at only - $1689



 


- OZ Wheels -

 

 


RK EXCEL Forged Aluminum Wheels.
Starting at only - $1499 /Set of Wheels
3.5"  Front: 7.94 lbs (3600g)
6.0"  Rear:  12.3 lbs (5570g)



 

 

 
Marchesini FORGED Magnesium & Aluminum Rims
 

 

 

 
GALESPEED      
FORGED Magnesium & Aluminum Rims

 





 
- Black Stone Carbon Fiber Rims -
Starting at only - $3179


 



Magnesium rear Marvic Piuma wheel
Marvic Magnesium Rims
IN STOCK






________________________________ 
REAR SETS ____________________________________

 



>> DRIVEN REAR SETS <<



GILLES TOOLING REARSETS
Gilles Rear Sets - $439
       Black  or   Ti   
IN STOCK    Ltd. Qty. 


 

 

R603Rearset.jpg (101664 bytes)
Vortex Full Adjustable Rear Sets   (starting at $299 )
NOW Available in BLACK OR SILVER
IN STOCK

 



wpe3.jpg (9495 bytes)
Sato Rear Sets - (Gold, Silver, Black)
IN STOCK


 


 

 


ALL NEW   HARD RACING.com T-SHIRTS
Dyno Jet, Brembo, Yoshimura Logo on one sleeve
And
Akrapovic, Alpinestars, Ohlins Logo on the other sleeve.






 HARDRACING.com    T-Shirts  &  DECALS
T-SHIRTS ONLY - $5.95  
&   
HARD RACING.com DECALS -   $0.95

(Not quite Bike Specific, But they do work with all bikes)


 


________________________________ ELECTRICAL____________________________________


 

GARMIN GPS Navigation





 

GPS Tracking
similar to Lo-jack


 



Scorpio Alarms
w/ FM Pager and

Proximity Remote


 



 


BAZZAZ PERFORMANCE
Z-FI  &    Z-FI Quick Shifters 
Z-FI TC (Traction Control)







Real time fuel adjustments
Display channels real-time: RPM, TP, map position (when using map switch), duty cycle,
fuel change, ignition change & wideband air/fuel ratio- (w/WB2 or AutoTune connected)
Weather resistant for use in all conditions
Log channels saved to internal memory and can be viewed / analyzed with Dynojet’s PowerCore Software
High contrast display, viewable in direct sunlight

Dyno Jet  POD-300 Display
 (for use with PCV only) Retail - $260  
OUR Sale Price - $219.95  
    IN STOCK




 


SPEEDO - TUNER - CALIBRATOR

 


 

              <<--Click
TRUE HIGH INTENSITY DISCHARGE (H.I.D.) LIGHTS
XENON LIGHTS .. KITS Starting at Only - $49.95/each

>> HID LIGHT CONVERSION KITS <<


 

 


Don't take chances with a Flat, or leaking Tire which can cause a crash or accident on your bike.
This system is very Easy to install.  Takes only about 3-5 min. installation
Completely Wireless.
>> Tire Pressure Monitoring System (TMPS) <<
 




Wide Band Commander
Wide Band Commander
A/R Fuel Monitor    IN STOCK
Retail - $550    ON SALE  - $428





________________________________ 
HARD PARTS____________________________________


GILLES Swing Arm Lifters &
SUPERBIKE Chain Adjusters
Starting at - $59 
Ltd Qty.
IN STOCK






Driven D-AXIS Bar End Mirror  
Sale Price - $105.95




>>  Driven BILLET ALUM. FUEL CAP and BASE  <<





captive wheel spacers driven racing

Driven Captive Wheel Spacers







________________________________ 
LIGHTING ____________________________________
 



> FRONT L.E.D. Turn Signals <


 

 


Hyper-White Xenon Bulbs - $35.95 (04-06 R1  Requires 2 Sets of H7's)
(Similar to New BMW/Mercedes Lights) IN STOCK







- HALO  Light Kits  Color Changing L.E.D Plazma Halo Kits
L.E.D. PERIMETER HALO LIGHT KITS    -    L.E.D Plazma Halo Kits 



 

 

 
PIG Spotter Mirrors w/ LED Turn Signals
These are the Ultimate Mirrors made from Billet Aluminum with Convex Lens
Offered in:  Black / Polished / Chrome

> PIG Spotters <






Clear LED Tail Lights   w/ Optional  Integrated  LED Signals
          (CTL-0071)   Only - $99.95  
  IN STOCK    Very Ltd. Qty. 
>> Clear Tail Lights & LED's <<
Unlike our Competitors, who sell Just a Circuit Board,
and require you to tear appart your entire Tail Light.....
We sell only the COMPLETE Tail Light Housing.
Just pop out your stock Tail Light, and Insert this one. OEM Plug for Tail Light.

NOTE: (TAIL Light come with Turn signal option. 
You don't Have to use them, if you don't want to.  But, they are included in the price.)

 

SEQUENTIAL TAILLIGHTS

 
We ALSO Offer some of our Tail Lights in a
SEQUENTIAL TAIL LIGHT VERSION as shown here.
>> Clear Tail Lights & LED's <<

 








Fender Eliminator Kits
1Y1006   - $159.95       SaleAnimator.gif (3865 bytes)  $98   IN STOCK  
(Includes Very Trick Looking Tag Light.  Signal style may vary Slightly)

(INVENTORY REDUCTION)


 


________________________________ 
RACE PARTS____________________________________


Vortex Mirror Block Off Plates





 


  VORTEX Race Stands 
Folds For Easy Storage/Travel






Chicken Hawk Tire Warmers
IN STOCK  
ON SALE... $399 +  Up







Chicken-Hawk Tire Warmers
$399 - $625  IN STOCK


 




>> TWO BROTHERS ALUMINUM RACING STANDS <<




 


>> Motion Pro Revolver Throttle Kit <<
The best way to improve throttle control, but throttle sensitivity can be changed mechanically
to suit riding conditions and rider preferences to great advantage no matter what your level of skill.

 

 

 
STOMP GRIP

 





>> DRIVEN AXLE BLOCK SLIDERS <<
 



 


__________________________ 
DISPLAY and TIMERS_______________________________


Starlane Digital Gear Indicator
w/ Integrated Shift Light

Starlane Digital Gear Inditcator

 

 

   
           Starlane Digital Dash      Optional GPS Receiver Offering Track Mapping

 

 

Starlane  GPS  Lap Timer  w/ Speedometer and RPM Pickup


>> Starlane GPS Lap Timers  <<
GPS (Satellite) Technology.   NO Transponder Need.
Imagine, No More worrying about setup .Transponders on the side of the track each time you go out, or
Each time you come in.  Those days are done. 
Just go out on the track, Set the Start/Finish Line and the GPS (Satellites) Does it all for you.

Current Speed, Lap Times, RPM;s, Max Speed, Fastest lap.....and much more.
You can even Save each track, in memory.  NO Wire Splicing, or taping necessary.
This Unit Easily transfers from bike to bike.  Or you can put it in your car, or truck, or SUV.
Very handy device. 



TYPE R  - With TRACK MAPPING.  Downloaded to your PC or Laptop

 








Real time fuel adjustments
Display channels real-time: RPM, TP, map position (when using map switch), duty cycle,
fuel change, ignition change & wideband air/fuel ratio- (w/WB2 or AutoTune connected)
Weather resistant for use in all conditions
Log channels saved to internal memory and can be viewed / analyzed with Dynojet’s PowerCore Software
High contrast display, viewable in direct sunlight

Dyno Jet  POD-300 Display
 (for use with PCV only) Retail - $260  
OUR Sale Price - $219.95  
    IN STOCK


 

 


     
     

Run ALL NEW Drag Race Simulator for Dyno Jet LCD Screen

-
- DYNO JET  LCD DISPLAY - SaleAnimator.gif (3865 bytes)    - DYNO JET  Mult-Function Hub SaleAnimator.gif (3865 bytes)
Want  To SEE What your bike, and Power Commander are Doing WITHOUT A COMPUTER.
Do you Want to Switch MAPS on the Fly, or see what gear you are in, or See what your fuel load is?
Do you want to tweak your map away from your house.  Then you want a Dyno Jet LCD Display.

UNIT Plugs Directly into Your Power Commander IIIusb.  Allows you to View Maps, Current Speed, Gear Position, RPM, TPS and Much More Can also Mtn. ON BIKE, in place of Gauges (On some Bikes)
  Click here for More Details
    >>  LCD DISPLAY  <<
LTD. QTY.  IN STOCK



 


KOSO Gauges
RX-1N  /  RX-2  /  RX-2N



 

Escort / Passport iQ  Radar Detector / Laser Detector / GPS Navigation,
All in one Device   click >> Passport iQ <<



 


Helmet/Bike Camera & Digital Video Recorder (DVR) & MP3 Player
w/ LCD Screen
Complete Kit

LTD. QTY.  IN STOCK


 


________________________________ 
PROTECTION____________________________________


 >> Vortex Racing BILLET Engine Covers <<





             Woodcraft Case Covers - Starting at - $93 
IN STOCK







Sample Photo

Woodcraft Frame Sliders









WoodCraft Axle Sliders






VORTEX (FS603)
(Starting  - $63)  IN STOCK





________________________________ 
FILTERS ____________________________________


K&N HIGH Flow Air Filter  (YA1004)  -  $59.95 
IN  STOCK  


 


Scotts Performance
Stainless Steel Oil Filters

IN STOCK


 


BMC High Flow Air Filters




________________________________ 
CLUTCHES ____________________________________

YOYODYNE UPGRADED SLIPPER CLUTCH
Yamaha does now offer a Slipper Clutch in their New Model R1.  But those are VERY Cheaply designed and made. 
It's the ONLY way Yamaha can afford to make the bike for only $11k.  But, it's NOTHING In compared to this one. 
Better Design, Higher Quality Parts.  JUST PLANE WORKS BETTER, and more consistent. 
OEM Fit.  Takes no time to swap out.   Uses STOCK Fibers and Steel Plates.   ONLY -$849
   



 


CBR 1000rr 2004-05 Slipper Clutch 
>>
YOYODYNE Slipper Clutch <<
Starting at only - $799




 




Barnett Clutch Packs
Packs include Steel Plates and Fiber Plates. 
Each pack is  - BIKE SPECIFIC. 
SALE PRICE - Starting @ $131 + Up  
  
 

 


 

stm1.jpg (39579 bytes)
STM Slipper Clutches  IN STOCK
Slipper Clutches are now becoming  Standard equipment   on  more and more
NEW Sport Bikes such as  (05-06 GSX-R1000 / 04-06 ZX-10R / 03-06 ZX636/6RR, 06 R6).
Now, STM Has released a Model for nearly ALL Popular Models

STM Slipper Clutches are an excellent  Upgrade to High Performance Sport Bikes.



 

 


________________________________ 
TIRES ____________________________________
 


Michelin PILOT POWER
& POWER RACE

Starting From - $109
  IN STOCK

 

 


Pirelli
SuperCorsa &
 Rosso Corsa

Starting From - $103
  IN STOCK




Shinko Tires
Starting From - $103
  IN STOCK
 

 

________________________________  Cameras & GPS______________________________
 



Liquid Image
 



 

Escort / Passport iQ  Radar Detector / Laser Detector / GPS Navigation,
All in one Device   click >> Passport iQ <<


 





________________________________ 
BODYWORK ____________________________________
 

SBW.jpg (14246 bytes)
>> SharkSkinz Racing Bodywork <<




 

Fiberglass and Carbon Racing Bodywork
"Call or E-Mail For Package Prices"
 
 




   
Sample Photos Shown 

CARBON DYNAMICS







   Puig Rear Hugger - $159.95
Carbon Look w/ Alum. Laser Etched Plate



 


STCBRRR.jpg (45820 bytes) 
SPORT TECH Chrome Windscreen($79-$85)


 



     
>> Puig Windscreens <<
From $67.95  +  

 





wpe4.jpg (4340 bytes)
Zero-Gravity Double Bubble Dark Smoke Windscreen
Ltd. Qty.  IN STOCK


 

 

   
VORTEX Upper Fairing Stay (Race use ONLY)
$149.95  






   
(Red / Silver / Blue)
Targa Seat Cowls  -  $183




 


HARRIS CARBON FIBER
FRONT FENDERS AND REAR HUGGERS



 

- HOTBODIES COLOR MATCHED UNDERTAILS and HUGGERS -



 

________________________________ 
MISC ____________________________________



SAMCO Silicone Coolant Hoses


 

 

 
>> Pro Bolts and Fastener Kits <<



 


FACTORY PRO Velocity Stacks
Starting as Low As - $145 
Click Link For Specific Prices.



 

 


ALL NEW   HARD RACING.com T-SHIRTS
Dyno Jet, Brembo, Yoshimura Logo on one sleeve
And
Akrapovic, Alpinestars, Ohlins Logo on the other sleeve.






 HARDRACING.com    T-Shirts  &  DECALS
T-SHIRTS ONLY - $5.95  
&   
HARD RACING.com DECALS -   $0.95

(Not quite Bike Specific, But they do work with all bikes)

 
 

CHECK YOUR BIKES SPECIAL PAGE OFTEN....... WE ARE ALWAYS UPDATING AS SOON AS NEW PARTS BECOME AVAILABLE.
Call (704-799-2192)  or E-Mail Us.

Hit Counter