'09-'11 R1:
For Special Offers, follow us on Facebook: Click
>>
<< to become a Fan or Friend.
You could be one of our Lucky $30 HardRacing e-GIFT CARDS PRIZE WINNERS,
Each Week..
New Parts / Updated:
1-14-2012
We update these pages often.
Be sure to hit
REFRESH on your browser, each time you check this page.
Or it may Not Show the new parts.
'07 Factory Yamaha
R1 SUPERBIKE
Only the Best Parts on the Planet go on these bikes
(Akrapovic Evolution 2 Exhaust w/ Ti Can., Ohlins Superbike Forks, Ohlins
TTX
Shock, Marchesini Forged Magnesium Rims,)
(Dyno Jet Power Commander IIIusb, Dyno Jet
Ignition Module, Dyno Jet
Quick Shifter, DID Chain,
AFAM Sprockets)
(STM Slipper Clutch, SharkSkinz Bodywork, Galfer Wave Rotors,
and a few more parts, no one knows about.) Every part listed here is the SAME EXACT Part, you can
put on your own bike. And we can get it for you.
The All New PC V & Dyno Jet Quick
Shifters:
Featuring: State of the Art Technology
New Mapping methods,
Transfer and Auxiliary Data Port for Future Add-ons.
Get One Now, Before they are all on Back Order
OPTIONAL ACCESSORIES
AUTO TUNE DEVICES - for Self Mapping.
PC V
ON SALE - $269
IN STOCK, Ltd. Qty.
For More Details: & Buy
It Now >> DynoJet Power
Commanders PC V <<
Dyno Jet Secondary Fuel Module >>
SFM << ON SALE - $219 Allows PCV to control ALL 8 Injectors
The Quick Shifter Expansion Moduel (QEM) allows the Dynojet Quick Shifter sensor to be used with the Power
Commander V on bikes that have 8 INJECTORS. The Q.E.M. connects to the upper
injectors and then into the PCV. Once the sensor is attached you will have full
Quick Shifter functionality at the LOWEST COST POSSIBLE! TO PLACE ORDER For QEM click- >>
QEM
<<
Auto Tune for Power Commander V
“Auto Tune” kits are available that include Wide Band O2 sensors and
control boxes. It will plug directly into the PCV and allow automatic fuel
adjustments. Auto Tune can make a map for each gear it can map each
cylinder separately for each gear if needed. (basic settings would make one
map for all gears) “Warm Up” fuel adjustment (unit reads engine temp
and allows fuel/timing adjustments based on it) Each map cell is
individually adjustable so you can specify an exact AFR value for each area
if needed. This allows the tuner/user to select specific AFR targets for
idle, cruise, and large throttle opening areas. By doing this you can
automatically tune the cruise area for best fuel economy while at the same
time achieve maximum power at wide open throttle.
If Dyno Jet does not have the exact map for your combination of parts you
simply need to choose the closest one and let the Auto Tune kit do the rest.
(if you have an very heavily modified engine and/or short drag pipes
verifying your settings on a dynamometer is recommended).
SPORT BIKE AUTO TUNE KITS
Retail : $250
OUR
SALE PRICE - $209
The Dynojet Quick Shifter Sensors allow "full throttle, clutch-
less" upshifts. These high quality sensors provide fast, accurate and
reliable shifting in conjunction with the Power Commander. Sensors are
attached to the gear linkage and connect into the Power Commander expansion
port. All sensors include a Software utility which allows the user to adjust
the "Kill Time" and "Minimum RPM Shift Point" within the Power Commander
Control Center Software. "Please note these are
NOT Power Shifters. They do
NOT shift for you. They
allow "full throttle, clutch- less" upshifts, by cutting the Fuel
or Spark for a split second as you start to shift
with your foot..
Dyno Jet PC V Quick Shifter:
ON SALE - $179(IN
STOCK)
(Requires: Quick Shifter Expansion Module (Q.E.M.)
More Information ->>
DynoJet
Quick Shifters <<
For more information,
please refer to the guide belo: Linkage Adapters ONLY Sold w/ Quick Shifters.(Not sold Separately)
Linear Sensors are universal..
Shift Rod Sensors require the gear linkage tie-rod to be modified. We are developing a
range of tie-rods for the popular models, as well as universal tie-rods that are
specifically designed to give maximum adjustment, allowing a combination of different M6
right hand and left hand male and female threads over a wide range of 160mm to 280mm. This
will allow easy installation on many models as well as some custom rear-set applications..
<-click
CBR1000RR Dyno Map, showing nearly 4 HP Gain, everywhere, With JUST the Ign.
Module changes.
Some bike have shown gains over 8 hp, in certain areas, by simply changing
the Ignition Timing.
Power Commander Ignition Module
An “Add-On”
Power Commander Ignition Module
for Power Commander V ’s,
are available NOW. These modules will plug directly into the PC V’s expansion port and the
bike’s ignition coils. Dynojet
Ignition Modules
use the latest in “direct coil driver technology.” Both advancing and
retarding of the ignition timing at specific throttle postion and rpm combination will be
possible. In “Advanced Mode,” the tuner will be able to set the timing for each
cylinder individually.
When tuned correctly, the Ignition module has potential to make excellent HP
Gains Through out the RPM Range. The Ignition Module will Also
allow the User to increase his Rev. Limiter of the Bike, Enabling them to
Tap the Most power
possible from the engine.
(Note, this does require a signed waiver form) The
Power Commander Ignition
Module will be
available for popular sport bike models.
This does not apply to Harley Davidson model Power Commander USB’s, as they include
ignition timing adjustment ability as part of the base unit..
The Dynojet Ignition Module is an “add on” accessory for
select Power Commander V . It allows you to control and adjust the
ignition timing of your motorcycles’ engine.
The Dynojet Ignition Module is connected to the PC V with it’s built in
expansion port link and communicates via a CAN interface. As in the case of
the Power Commander, the Dynojet Ignition Module uses OEM style connectors
to plug in-line of the stock ignition harness so no cutting or splicing is
required.
The Dynojet Ignition Module uses “direct coil driver technology” and allows
a high degree of timing adjustment. In the Power commander Control Center
Software the user is able to advance or retard the ignition curve up to 10
degrees based on throttle position and RPM. It is also possible to alter the
timing for each cylinder individually if necessary.
The Ignition Module comes standard
with no adjustments made in the map for the timing table. Due to different
states of tune, fuel quality, and engine modifications we found it is best
to leave the ignition timing stock for safety reasons.
On motorcycles that have eight injectors and were not previously able to
benefit from the use of the Dynojet Quick Shifter, the Ignition Module now
allows this functionality. The Dynojet Quick Shifter is connected to the
expansion port between the Ignition Module and the PC V Regular Price - $361ON SALE -
ON SALE - $285 Buy it Now >>
DynoJet
Ignition Modules <<
Brembo RCS19 Brake Mastercylinder w/ FOLDING Lever (RCS 19)
The revolutionary aspect of the Brembo RCS19 Brake Mastercylinder is the ability
to choose between the 19x18 and 19x20 configuration. If you have read about Brembo Master Cylinders, you will know what these numbers mean and that there is a trade-off
between the two pivot configurations. Not to say that either configuration is
bad, but the rider had to choose between varying degrees of feel and power. Now
the rider can change the configuration to suit their needs. No more
compromises!
Another unique aspect to the RCS19 is itcomes
with a microswitch for the brake.
For racers, the adjuster knob has been relocated to the same position as the
19x18 Billet Folding Brake Master Cylinder that is used by Valentino Rossi and
Nicky Hayden in MotoGP and WorldSuperBike. Two springs have been installed to
ensure constant contact between the lever and the pushrod to ensure a longer
lifespan.
The Brembo 19RCS brake master cylinder retains features that made Brembo the top brake
system manufacturer today including forged CNC-machined construction and a
folding lever that reduces crash damage. RCS19
Sale Price:
$319.95 (Order this Brembo MC on-line, and receive
Free EXPRESS Shipping )
IN STOCK
Brembo ZO4 Upgraded Pads for OEM Calipers
Sale Price $123-$231 >>
BREMBO <<
Don't take chances with a Flat, or leaking Tire which can
cause a crash or accident on your bike.
This system is very Easy to install. Takes only about 3-5 min.
installation
Completely Wireless.
>> Tire Pressure
Monitoring System (TMPS) <<
Worlds Lightest Weight High Definition Video Camera w/ GPS Mapping
Technology.
NOW, you can see where you where you Recorded your Video, and How Fast you
were going
Where you went, and What Altitude, ALL on the Same Screen, At the same
time. All from this Little Camera.
And soon to be release Blue Tooth Apps. to connect to your Android Mobile
Phone, and iPhone. >> Contour GPS HD
Video Camera <<
Escort / Passport iQ Radar Detector / Laser Detector /
GPS Navigation,
All in one Device click >>
Passport iQ <<
BREMBO RSC Yamaha Replacement Cable Clutch Lever Mechanical clutch lever assembly machined entirely from billet.
Lever boss has special geometry. Plug-and-play design ensures the lever can
mount directly to the original arm lever assembly. Similar in all respects to
the 19RCS Master Cylinder with laser-imprinted Brembo® Racing logo and the
famous tri-color flag on the lever boss.
Perfect Match for your RCS19 Brake RSC Yamaha Cable Clutch Lever
Sale Price:
$149.95 Fits These Model Bikes ONLY: '02-'10 R1, & '99-'10 R6
<<--Click TRUE HIGH INTENSITY DISCHARGE (H.I.D.) LIGHTS
XENON LIGHTS .. KITS Starting at Only - $79.95/each
Ohlins ALL NEW 30mm NIX Fork Cartridge Kits
&
FGR PRESSURIZED
>>
CARTRIDGE KITS
<<
LIMITED TIME ONLY... SUPER SALE PRICE
PACKAGE DEAL 30mm Kit and Shock.... Only - $2250
Limited QTY. IN STOCK The new Road&Track 30 mm front fork cartridge kit from Öhlins is
based on experience gained from World Supersport and Superstock
Championships. It doesn’t matter if you are heading for a National
Roadracing title or if you are taking your bike to the local race track. The
NIX 30mm cartridge kit will give you loads of performance, stable damping
characteristics and fantastic comfort. Greater Surface Area translates into
more control, less negative pressure on the back side of the piston
virtually eliminating cavitation commonly found on other brands of cartridge
kits. These 30mm NIX Cartridge Kit has a unique design with compression
damping and adjuster on the left leg and rebound damping and adjuster on the
right leg –
i.e. all adjustments are on the TOP of the Forks Together, with the Spring
Pre-Load adjusters.
AKRAPOVIC Carbon Parts
(Fenders, Panels, Huggers..etc)
Please call or
E-mail For Pricing and availability.
RACE TECH FORK SPRINGS - for OEM Forks
Race Tech manufactures precision high performance springs that have
a high stiffness to mass ration.
In other words; Race Tech Fork springs are lightweight for the their
partifuclar rate.
This requires the finest materials and processing.
Race Tech OEM Replacement Fork Springs - $105
RACE TECH SHOCK SPRINGS - for OEM Shock
Race Tech HP Springs have a high
stiffness-to-mass ratio. In other words; our springs are light weight
for their particular spring rate. This requires the finest materials and
processing. Shot-peened and pre-set so they cannot sack out. All Race
Tech HP Springs have the highest rate tolerences in the industry. These
are the finest springs in the world-guaranteed.
Race Tech OEM Replacement Shock Springs - $105
Race Techs original bolt-on fork valving system
for cartridge forks
Triples the flow area by putting valving control on the shim stack
instead of the overly restricted stock piston
Outstanding tunability, improved control, traction, plushness and
bottoming resistance
Includes complete instructions, Gold Valve pistons, valving charts, and
valving shims
Race Tech 20mm Gold Valve Fork Kit
for OEM FORKS - $149
TruGel Batteries The Ultimate LONG Lasting Top
Quality Motorcycle Battery. PERIOD.
And Best of All, They are LESS Cost then traditional Lead/acid batteries
ALL NEW HARD RACING.com
T-SHIRTS
Dyno Jet, Brembo, Yoshimura Logo on one sleeve
And
Akrapovic, Alpinestars, Ohlins Logo on the other sleeve.
HARDRACING.comT-Shirts & DECALS T-SHIRTS ONLY - $5.95
&
HARD RACING.com DECALS - $0.95 (Not quite Bike Specific, But they do work with all
bikes)
'09-'10 R1 Puig Windscreens
(CLEAR OR DARK. SMOKE
)
From $67.95 + Up
CRG Levers are Carved from
aluminum.
They are beautiful
as well as functional.
CRG Levers are Designed to be bolt on replacements, fully adjustable.
Available in Gold or Gray.
A few Select CRG Levers are available in a short lever version.
( 1.25" Shorter ) Learn More or Buy Now >
CRG Levers <
- $84.95 & Up
'09-'10 R1 Fender
Eliminator Kit 1Y1009 - $139.95 $109.95
Kit Includes: Short stalk turn signals LED license
light No cutting or drilling (Exactly As Shown)
This kit
is The equivalant of a Set of Ohlins Forks,
Less the Sliders, and Bottoms.
Everything INSIDE a Set of Ohlins RT Forks, comes in this Kit.
• Includes Complete Internal Cartridge
NEW Compression Pistons, NEW Rebound Pistons NEW Piston Rings NEW Shims Complete Set of One-Way Valves, NEW Washers
NEW 25mm Fork Springs
Recommended Track Settings
External rebound Damping External compression Damping External Spring preload adjusters
Same 25mm Fork Springs that
are on the R&T Forks Works with STOCK Fork sliders and bottoms, so it's
SuperSport Legal
In nearly all regions.
K&N High Flow Air Filter (YA-1009R & YA1009)
And remember they're washable.
You never have to buy another air filter again. 1,000,000 mile
warranty... K&N Filter Part# (YA1009) ON SALE -
$67.95 IN STOCK K&N Filter Part#
(YA1009Race
) ON SALE -
$75.95 IN STOCK
Ohlins
30mm SUPERSPORT FORK
VALVE KIT
For '09-'10 R1 ONLY
"Compression & Rebound Valves"
(For use with STOCK '09-'10 R1 FORKS)
• Kit Improves Comfort & Performance
of Stock Forks
• Includes ONE NEW 30mm Compression Piston,
ONE NEW
30mm Rebound Piston, Piston Rings,
Shims, One-Way
Valves, Washers, and
Recommended Track Settings
• Bolt-On Installation For ALL Stock Forks
• Recommended For "STREET or RACE"
FPK 108 -
Ltd.
Qty. IN STOCK Ohlins
Valve Kit
YOYODYNE UPGRADED SLIPPER CLUTCH
The Stock Slipper Clutch is decent. But VERY Cheaply designed
and made.
It's the ONLY way Yamaha can afford to make the bike for only $11k.
But, it's NOTHING In compared to this one.
Better Design, Higher Quality Parts. JUST PLANE WORKS BETTER, and more
consistant..
You won't think your bike had a Slipper Clutch in it from the Factory
once you upgrade to this one.
OEM Swap Out. Takes no time to swap out. Uses STOCK
Fibers and Steel Plates. ONLY -$799
>>
GPR Steering Damper
<<
Retail - $475
Sale Price - $
Click
GPR
for Sale Price Please note, '04-'06
R1 DOES require drilling (2) small 6mm Holes to mtn. the Frame
bracket.
Once the kit is installed, these holes are NOT Visible.
ALL NEW
Brembo "HP" BILLET Brake Calipers
(2 Piece Design) 4
Piston, 2 Pad Setup.
Designed very similar to
the "Racing" Monobloc Calipers.
But, at LESS then half the Cost.
EXCELLENT Upgrade and OEM Fit.
100mm Bolt-Hole Setup
Brembo has developed a new caliper with radial attachments that is
interchangeable on the standard radial forks of 07-08 R1 With a caliper body machined
from solid metal, special attention was paid to achieving high braking power
and stiffness, utilizing technology derived
directly from race engineering. The product, which is supplied in kit form,
is equipped with sintered brake pads - at the cutting edge of today's
manufacturing technology; the kit also contains an instruction handbook, a
set of Brembo decals, and a series of practical temperature stickers as used
in race conditions to monitor the working temperature of the calipers. The
stickers clearly identify the thoroughbred race pedigree of the brakes.
To assure that we send you the correct spacers, please let us know the make,
model and year of the bike that you plan on putting these calipers on.
Price Includes Brembo PADS and
Special Brackets for 07-08 & '09-'10 R1
The
floating rotors were developed specifically to provide owners of Japanese
Sportbikes (HONDA, YAMAHA, SUZUKI, KAWASAKI) with the maximum performance
levels on the street and on the track. The new rotors are available in three
diameters and are of greater thickness than standard rotors. The braking
surface features a series of drilled holes to maximize performance and
control when braking while simultaneously reducing rotating mass with
consequent advantages in terms of machine handling. The braking surface is
connected to the carrier, which is machined from solid aluminum and is the
product of a comprehensive FEM calculation procedure. The connection is
achieved by means of ten floating- type aluminum buttons, reflecting a
strictly race style engineering project. The kit contains the two rotors,
and a set of Brembo decals.
Retail - $669.95 Sale Price -
$292.50/each Disc x 2
<
BREMBO PRICING >
R1 Puig Windscreens
(CLEAR OR DARK. SMOKE
)
From $67.95 + Up
BREMBO REAR
HP CALIPER
Following the latest development in
Brembo’s high performance kits programme, which broadly extends the
product range still further, motorbike enthusiasts are now offered a
rear caliper and bracket kit interchangeable with the
majority of OE assemblies fitted to Japanese and European supersport
models. Machined entirely from billet, the caliper body is the outcome
of exhaustive FEM calculations that optimize weight and stiffness. The
caliper is supplied complete with sintered pads —
currently the top option available on the market. Special care has been
taken over the need to achieve optimum control of the braking
action, even in conditions of poor grip that could be caused by
reduction of rear wheel weight during the braking action. The kit is
compatible both with OE brake master cylinders and with OE discs fitted
to all main supersport bikes.
In the case of Japanese supersport bikes
(SUZUKI, YAMAHA, HONDA and KAWASAKI), the kit includes
an adapter bracket that drops the caliper below the rear axle — its
usual position on racing machines. This helps to lower the centre of
gravity of bike and rider.
Available for these Models ONLY
: '06-'07 CBR1000RR / '04-'05 CBR1000RR
'07-'08 GSX-R1000 / '08-'09 ZX-10 /
'06-'07 ZX-10 / '04-'05 ZX-10
'07-'10 R1 / '04-'06 R1
HP " BILLET"
REAR
Caliper
Retail - $850.95
Price
Includes Brembo PADS.
Sale Price $759- <
BREMBO PRICING >
Clear LED Tail Lights
w/ Optional Integrated LED Signals
>>
Clear Tail Lights & LED's <<
Unlike our Competitors, who sell Just a
Circuit Board,
and require you to tear appart your entire Tail Light.....
We sell only the COMPLETETail Light Housing.
Just pop out your stock Tail Light, and Insert this one. OEM Plug for Tail
Light. NOTE: (TAIL Light come with
Turn signal option.
You don't Have to use them, if you don't want to. But, they are
included in the price.)
>>
Clear Tail Lights & LED's <<
STM Slipper Clutches
Slipper Clutches are now becoming
Standard equipment on more and more
NEW Sport Bikes such as (05-06
GSX-R1000 / 04-06 ZX-10R / 03-06
ZX636/6RR, 06 R6).
Now, STM Has released a Model for nearly ALL Popular Models
STM Slipper Clutches are an excellent Upgrade to High
Performance Sport Bikes.
RK EXCEL Forged Aluminum
Wheels.
Starting at only - $1499 /Set of Wheels 3.5" Front: 7.94 lbs (3600g)
6.0" Rear: 12.3 lbs (5570g)
Starlane GPS Lap Timer
w/
Speedometer and RPM Pickup
>> Starlane GPS
Lap Timers << GPS (Satellite)
Technology. NO Transponder Need. Imagine, No More worrying about setup .Transponders on the side
of the track each time you go out, or
Each time you come in. Those days are done.
Just go out on the track, Set the Start/Finish Line and the GPS (Satellites)
Does it all for you. Current Speed, Lap Times, RPM;s, Max Speed, Fastest
lap.....and much more.
You can even Save each track, in memory. NO Wire Splicing, or
taping necessary.
This Unit Easily transfers from bike to bike. Or you can put it in
your car, or truck, or SUV.
Very handy device.
TYPE R - With TRACK MAPPING. Downloaded to your
PC or Laptop
Starlane GPS Lap Timer
w/
Speedometer and RPM Pickup
>> Starlane GPS
Lap Timers << GPS (Satellite)
Technology. NO Transponder Need. Imagine, No More worrying about setup .Transponders on the side
of the track each time you go out, or
Each time you come in. Those days are done.
Just go out on the track, Set the Start/Finish Line and the GPS (Satellites)
Does it all for you. Current Speed, Lap Times, RPM;s, Max Speed, Fastest
lap.....and much more.
You can even Save each track, in memory. NO Wire Splicing, or
taping necessary.
This Unit Easily transfers from bike to bike. Or you can put it in
your car, or truck, or SUV.
Very handy device.
TYPE R - With TRACK MAPPING. Downloaded to your
PC or Laptop
Hyper-White Xenon Bulbs - $29.95
IN STOCK( R1 Requires 2 Sets
of H7's)
(Similar to New BMW/Mercedes Lights)
-DYNO JET
LCD DISPLAY
-
- DYNO JET Mult-Function
Hub -
Plugs Directly into Your Power Commander IIIusb
View Maps, Speed, Gear Position, RPM, TPS and Much More
Can also Mtn. ON BIKE, in place of Gauges
(On some Bikes)
LTD. QTY. IN STOCK
Run ALL NEW Drag Race
Simulator for Dyno Jet LCD Screen
-
CHECK YOUR BIKES SPECIAL PAGE OFTEN....... WE ARE ALWAYS
UPDATING AS SOON AS NEW PARTS BECOME AVAILABLE.
Call (704-799-2192) or E-Mail Us.
COMING SOON
Each Year, when the “ALL NEW”
models are released it takes anywhere from
2 weeks up
to 4 months for new parts to get released to the public.
The Parts Manufacturer’s
have to get the bikes, make the prototypes. Test the protype.
If it works correctly, then they Manufacturer volumes, and then get them to the
dealers.
This takes time. It’s just part of life.
Meanwhile, customers like yourself, are anxiously waiting to get the newest
and coolest products… NOW.
And each year, many of you will wait until the product
is released to order it.
But, by the time the product is released, the demand far exceeds the supply.
Meaning 100
customers want Product X, but only 30
units arrive in the first shipment to the U.S. So, that means 70 customers have to wait another 2-4 weeks
for more product to become available.
Because Soo many others have already placed their orders, you have to wait
even longer to get yours.
Well, there is a way to fix that.
This
year we are encouraging our customers to order early.
There is absolutely, NO RISK. NON AT ALL.
We will NOT Charge your credit card until the product is ready to ship
to you. PERIOD.
NO Deposit, NO Cancellation Fee’s, NO BS.
And you may cancel your
order at anytime. We have no problem with that.
The demand for these new parts is soo high, if you cancel, we just go down the
list,
and make the next customer the happiest man in town.
So, you have Nothing to
lose… and soo much to gain.
The sooner you put your
order in for a new part, the higher up on the list you get.
That way, when the new part gets released, you get first dibbs over everyone
else.
It doesn’t matter if there is a price yet or a even a
part number.
Just tell us what bike, and what part, and Your Order is LOCKED.
PERIOD. It's that easy.
We will call you the day the part is ready to ship, and give you final decision
if you still want it.
If you say “YES”…. we will ship it immediately.
If you say “NO”, we will cancel the order and move down the list to the next
customer.
NOTHING TO LOSE……… Yet Soo much to gain.
Don’t wait till the last
minute. If you have a part you want to order, CALL US
now or >Order On-Line<
ONE MORE TIME….. DON’T WAIT.
You know the saying, “You snooze, You lose”.
** Please note,
the No cancellation fee ONLY applies to "ALL NEW" Parts that have not been
released yet.
It does NOT apply to
"Special Order Parts" that have already been released to the public and are no
longer in demand.
<< to become a Fan or Friend. 
$109.95
The
floating rotors were developed specifically to provide owners of Japanese
Sportbikes (HONDA, YAMAHA, SUZUKI, KAWASAKI) with the maximum performance
levels on the street and on the track. The new rotors are available in three
diameters and are of greater thickness than standard rotors. The braking
surface features a series of drilled holes to maximize performance and
control when braking while simultaneously reducing rotating mass with
consequent advantages in terms of machine handling. The braking surface is
connected to the carrier, which is machined from solid aluminum and is the
product of a comprehensive FEM calculation procedure. The connection is
achieved by means of ten floating- type aluminum buttons, reflecting a
strictly race style engineering project. The kit contains the two rotors,
and a set of Brembo decals.
