DynoJet
UNIVERSALE Ign. QUICK SHIFTER CONTROLLER BOX
            


    

Who Uses DynoJet Power Commanders, QuickShifters and Ignition Modules  ..???

2008 Factory Kawasaki
2008 Factory Yamaha
2008 Attack Kawasaki
2008 World Ducati Factory
2007 AMA SuperSport Champion (Factory Kawasaki / Roger Lee Hayden)
2007 AMA Formula Extreme Champion (Factory HONDA / Josh Hayes )
2006 AMA Formula Extreme Champion (Factory HONDA / Josh Hayes )
2006 AMA SuperSport Champion (Factory Yamaha /Jamie Hacking)
2006 AMA SuperStock Champion (Factory Yamaha /Jamie Hacking)
2005 AMA Supersport Champion (Factory Kawasaki)
2005 AMA Team  M4/Emgo Suzuki  
2005 AMA Team Graves Motorsports  (Factory Yamaha)
2004 AMA SupersportChampion (Factory Kawasaki)
2004 AMA Superstock Champion(Graves Yamaha)
2003 AMA Superstock Champion
2002 AMA Superbike Champion(Factory Honda/Nikki Hayden)
2002 AMA Formula Extreme Champion Attack Suzuki
Factory  Honda  (CBR1000RR, RC-51, F4i, CBR600RR)
Erion Racing (CBR1000RR, CBR954, F4i, CBR600RR)
Attack Suzuki  (02-03 Formula Extreme Champion)
Valvoline/Emgo Suzuki (GSX-R 600/750/1000)
Graves Yamaha (R6 / R1 )
All Powered w/  DynoJet.!!!

CALL or E-Mail For Availability. 

PG.jpg (2472 bytes)

We will  NOT be Undersold..... WE GUARANTEE IT.

We WILL Beat It ANYONE ELSE's Advertised Price On
"IN-STOCK" Quick Shifters or Ignition Modules.

 

DYNO JET UNIVERSAL IGNITION
QUICKSHIFTER CONTROL BOX

   
 
This is a stand alone universal Ignition Quick Shifter module.

This unit allows any vehicle with 4 cylinders or less (motorcycle, ATV, mini sprint, etc.) to have quick shifter functionality without the need for a Power Commander. It comes with "coil cap" style connectors for easy installation on most late model motorcycles. For applications that do not have this style of coil the connectors can be removed and the unit hard wired in.

User Adjustable "kill times"
The Dyno Jet Ignition Quick Shifter Control Box incorporates a gear position input so that the "kill times" can be adjusted for each gear. "Kill time" can be set shorter in high gears, while also allowing smoother and more positive shifts in lower gears (particularly the 1-2 shift).

Additionally the unit features "intellishift." The controller automatically staggers the "kill times" to cylinder for increased smootheness during lower rpm, part throttle shifts. No computer is required for setup. Installation can be done in as little as 30 minutes.
This is a STAND ALONE CONTROLLER BOX
No Power Commander needed
No Computer Needed.

DYNO JET UNIVERSAL IGN. QUICKSHIFTER CONTROLLER BOX
Part # 4-118  $325  SALE PRICE -  $249 

DYNO JET Quick Shifters Starting @ $179 - $244
PLEASE NOTE: This Control Box Must be used with one of the Dyno Jet Quick Shifters listed below (sold separately).      >> Quick Shifter Application Chart <<
 

 

 DYNO JET QUICK SHIFTERS
 

The Dynojet Quick Shifter Sensors   allow "full throttle, clutch- less" upshifts. These high quality sensors provide fast, accurate and reliable shifting in conjunction with Ign. QuickShifter Control Box Shown Above.
Sensors are attached to the gear linkage and connect into Ign. QuickShifter Control Box  expansion port.

 "Please note these are NOT Power Shifters.  They do NOT shift for you.  They allow "full throttle, clutch- less" upshifts, by cutting the Fuel or Spark  for a split second as you start to shift with your foot..   
           
4-101  Shift Rod Sensor  Pull Type           
 4-102  Shift Rod Sensor  Push Type
 

For more information, please refer to the guide belo: Linkage Adapters ONLY Sold w/ Quick Shifters.(Not sold Separately)

Shift Rod Installation Guide
Pdf | Zip
Linear Sensors  are universal..
Shift Rod Sensors require the gear linkage tie-rod to be modified. We are developing a range of tie-rods for the popular models, as well as universal tie-rods that are specifically designed to give maximum adjustment, allowing a combination of different M6 right hand and left hand male and female threads over a wide range of 160mm to 280mm. This will allow easy installation on many models as well as some custom rear-set applications..


Pull Type


4-103
Linear Sensor
Pull Type

4-104
Linear Sensor
Push Type

 

4-109
Harley  EFI

4-110
 Harley  V-ROD


 

 

PG.jpg (2472 bytes)
 

For more information, please refer to the guide below: Linkage Adapters ARE ONLY Sold w/ Quick Shifters.( We do Not sell Separately)

Shift Rod Installation Guide
Pdf | Zip
Linear Sensors  are universal..
Shift Rod Sensors require the gear linkage tie-rod to be modified. We are developing a range of tie-rods for the popular models, as well as universal tie-rods that are specifically designed to give maximum adjustment, allowing a combination of different M6 right hand and left hand male and female threads over a wide range of 160mm to 280mm. This will allow easy installation on many models as well as some custom rear-set applications..

 

 

PG.jpg (2472 bytes)