Buell power commander V, PCV, Quickshifter, dynojet power commander, PCIII, PCIIIusb

Buell
DynoJet Power Commander II / III / IIIusb / IIIr / V
DynoJet Quick Shifters & Ignition Module & Auto Tune

powercommander.gif (110118 bytes)

PC V showing with OPTIONAL accessories.

We will NOT be Undersold..... WE GUARANTEE IT.

We WILL Beat It ANYONE ELSE's Advertised Price On
"IN-STOCK" Power Commanders

PCII & PCIII/usb As Low As - $185
(See Price Chart Below for Specific Model Prices)

In most cases each bike only has ONE type of Power Commander available for it. All you have to do is look at the application chart listed below. It clearly shows the power commander Models Available for your bike.
At this time Dyno Jet ONLY Makes those specific Power Commanders listed for that particular bike.... and No Other.

Buell
BIKE	YEAR	Model	Part #	Availability	SALE PRICE	Retail	Purchase!
1125	'08-09	PCV	15-016	Available	$269	$~~380~~

Dyno Jet PCIIIusb & PC V Add-Ons
Quick Shifters & Ignition Modules & Auto Tune

Auto Tune for Power Commander V
“Auto Tune” kits are available that include Wide Band O2 sensors and control boxes. It will plug directly into the PCV and allow automatic fuel adjustments.
Auto Tune can make a map for each gear it can map each cylinder separately for each gear if needed. (basic settings would make one map for all gears)
“Warm Up” fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on it)
Each map cell is individually adjustable so you can specify an exact AFR value for each area if needed. This allows the tuner/user to select specific AFR targets for idle, cruise, and large throttle opening areas. By doing this you can automatically tune the cruise area for best fuel economy while at the same time achieve maximum power at wide open throttle.
If Dyno Jet does not have the exact map for your combination of parts you simply need to choose the closest one and let the Auto Tune kit do the rest. (if you have an very heavily modified engine and/or short drag pipes verifying your settings on a dynamometer is recommended).

AUTO TUNE KITS STARTING AT - $219
Click for more details >> AUTOTUNE <<

djign.jpg (87661 bytes)

These Accessories are for PCIIIusb models ONLY!! They will NOT WORK with Other Models.

Power Commander Ignition Module
Now Available for Select Bikes

>> Ignition Module Pricing & A pplication Chart <<

An “Add-On” Power Commander Ignition Module ARE available for Power Commander USB & PC V ’s. These modules will plug directly into the PC's expansion port and the bike’s ignition coils. Dynojet Ignition Modules use the latest in “direct coil driver technology.” Both advancing and retarding of the ignition timing at specific throttle position and rpm combination will be possible. In “Advanced Mode,” the tuner will be able to set the timing for each cylinder individually.
The Power Commander Ignition Module will be available for popular sport bike models.
This does not apply to Harley model Power Commander USB’s & PC V, as they include ignition timing adjustment ability as part of the base unit..

The Dynojet Quick Shifter Sensors are compatible with PCIIusb & PC V Power Commander ONLY and allow "full throttle, clutch- less" upshifts. These high quality sensors provide fast, accurate and reliable shifting in conjunction with the Power Commander. Sensors are attached to the gear linkage and connect into the Power Commander expansion port. All sensors include a Software utility which allows the user to adjust the "Kill Time" and "Minimum RPM Shift Point" within the Power Commander Control Center Software. "Please note these are NOT Power Shifters. They do NOT shift for you. The allow "full throttle, clutch- less" upshifts, by cutting the Fuel for a split second as you start to shift..

>> Quick Shifter Pricing & A pplication Chart <<

For more information, please refer to the guide belo: Linkage Adapters ONLY Sold w/ Quick Shifters.(Not sold Separately)

Sensor Installation Instructions	Pdf \| Zip
Shift Rod Installation Guide	Pdf \| Zip

Linear Sensors are universal..
Shift Rod Sensors require the gear linkage tie-rod to be modified. We are developing a range of tie-rods for the popular models, as well as universal tie-rods that are specifiAvailabley designed to give maximum adjustment, allowing a combination of different M6 right hand and left hand male and female threads over a wide range of 160mm to 280mm. This will allow easy installation on many models as well as some custom rear-set applications..