'05-'06 ZX-636 / 6RR:
For Special Offers, follow us on Facebook: Click
>>
<< to become a Fan or Friend.
You could be one of our Lucky $30 HardRacing e-GIFT CARDS PRIZE WINNERS,
Each Week..
New Parts / Updated:
1-14-2012 We
update these pages often.
Be sure to hit REFRESH on your browser, each time you check this page.
Or it may Not Show the new parts.
What's Available NOW..??????
CHECK YOUR BIKES SPECIAL PAGE OFTEN....... WE ARE ALWAYS
UPDATING AS SOON AS NEW PARTS BECOME AVAILABLE.
Call (704-799-2192) or E-Mail Us.
This is Just a Small List of the parts that are available NOW, or Due to Release
Any Day.
We have many others as well. Just call (704-799-2192) or E-Mail Us.
AVAILABLE NOW
The All New PCIIIusb & Dyno Jet Quick
Shifters:
Featuring: State of the Art Technology
New Mapping methods, USB Port For Easier & Faster
Transfer and Auxiliary Data Port for Future Add-ons.
Get One Now, Before they are all on Back Order.
PCIIIusb
ON SALE - $265
IN STOCK
For More Details: & Buy
It Now >> DynoJet Power
Commanders PCIIIusb <<
The Dynojet Quick Shifter Sensors are compatible with USB Power
Commander ONLY and allow "full throttle, clutch-
less" upshifts. These high quality sensors provide fast, accurate and
reliable shifting in conjunction with the Power Commander. Sensors are
attached to the gear linkage and connect into the Power Commander expansion
port. All sensors include a Software utility which allows the user to adjust
the "Kill Time" and "Minimum RPM Shift Point" within the Power Commander
Control Center Software. "Please note these are
NOT Power Shifters. They do
NOT shift for you. They
allow "full throttle, clutch- less" upshifts, by cutting the Fuel
or Spark for a split second as you start to shift
with your foot..
Dyno Jet Quick Shifters:
ON SALE - $197 (IN
STOCK)Requires Ignition
Module
Buy It Now >>
DynoJet
Quick Shifters <<
For more information,
please refer to the guide belo: Linkage Adapters ONLY Sold w/ Quick Shifters.(Not sold Separately)
Linear Sensors are universal..
Shift Rod Sensors require the gear linkage tie-rod to be modified. We are developing a
range of tie-rods for the popular models, as well as universal tie-rods that are
specifically designed to give maximum adjustment, allowing a combination of different M6
right hand and left hand male and female threads over a wide range of 160mm to 280mm. This
will allow easy installation on many models as well as some custom rear-set applications..
<-click
CBR1000RR Dyno Map, showing nearly 4 HP Gain, everywhere, With JUST the Ign.
Module changes.
Some bike have shown gains over 8 hp, in certain areas, by simply changing
the Ignition Timing.
Power Commander Ignition Module
An “Add-On”
Power Commander Ignition Module
for Power Commander USB’s,
are available NOW. These modules will plug directly into the PCIIIUSB’s expansion port and the
bike’s ignition coils. Dynojet
Ignition Modules
use the latest in “direct coil driver technology.” Both advancing and
retarding of the ignition timing at specific throttle postion and rpm combination will be
possible. In “Advanced Mode,” the tuner will be able to set the timing for each
cylinder individually.
When tuned correctly, the Ignition module has potential to make excellent HP
Gains Through out the RPM Range. The Ignition Module will Also
allow the User to increase his Rev. Limiter of the Bike, Enabling them to
Tap the Most power
possible from the engine.
(Note, this does require a signed waiver form) The
Power Commander Ignition
Module will be
available for popular sport bike models.
This does not apply to Harley Davidson model Power Commander USB’s, as they include
ignition timing adjustment ability as part of the base unit..
The Dynojet Ignition Module is an “add on” accessory for
select Power Commander III USB. It allows you to control and adjust the
ignition timing of your motorcycles’ engine.
The Dynojet Ignition Module is connected to the PCIII USB with it’s built in
expansion port link and communicates via a CAN interface. As in the case of
the Power Commander, the Dynojet Ignition Module uses OEM style connectors
to plug in-line of the stock ignition harness so no cutting or splicing is
required.
The Dynojet Ignition Module uses “direct coil driver technology” and allows
a high degree of timing adjustment. In the Power commander Control Center
Software the user is able to advance or retard the ignition curve up to 10
degrees based on throttle position and RPM. It is also possible to alter the
timing for each cylinder individually if necessary.
The Ignition Module comes standard
with no adjustments made in the map for the timing table. Due to different
states of tune, fuel quality, and engine modifications we found it is best
to leave the ignition timing stock for safety reasons.
On motorcycles that have eight injectors and were not previously able to
benefit from the use of the Dynojet Quick Shifter, the Ignition Module now
allows this functionality. The Dynojet Quick Shifter is connected to the
expansion port between the Ignition Module and the PCIIIusb. Regular Price - $361ON SALE - $285IN STOCK Buy it Now >>
DynoJet
Ignition Modules <<
Brembo RCS19 Brake Mastercylinder w/ FOLDING Lever (RCS 19)
The revolutionary aspect of the Brembo RCS19 Brake Mastercylinder is the ability
to choose between the 19x18 and 19x20 configuration. If you have read about Brembo Master Cylinders, you will know what these numbers mean and that there is a trade-off
between the two pivot configurations. Not to say that either configuration is
bad, but the rider had to choose between varying degrees of feel and power. Now
the rider can change the configuration to suit their needs. No more
compromises!
Another unique aspect to the RCS19 is itcomes
with a microswitch for the brake.
For racers, the adjuster knob has been relocated to the same position as the
19x18 Billet Folding Brake Master Cylinder that is used by Valentino Rossi and
Nicky Hayden in MotoGP and WorldSuperBike. Two springs have been installed to
ensure constant contact between the lever and the pushrod to ensure a longer
lifespan.
The Brembo 19RCS brake master cylinder retains features that made Brembo the top brake
system manufacturer today including forged CNC-machined construction and a
folding lever that reduces crash damage. RCS19
Sale Price:
$319.95 (Order this Brembo MC on-line, and receive
Free EXPRESS Shipping )
IN STOCK
Don't take chances with a Flat, or leaking Tire which can
cause a crash or accident on your bike.
This system is very Easy to install. Takes only about 3-5 min.
installation
Completely Wireless.
>> Tire Pressure
Monitoring System (TMPS) <<
Worlds Lightest Weight High Definition Video Camera w/ GPS Mapping
Technology.
NOW, you can see where you where you Recorded your Video, and How Fast you
were going
Where you went, and What Altitude, ALL on the Same Screen, At the same
time. All from this Little Camera.
And soon to be release Blue Tooth Apps. to connect to your Android Mobile
Phone, and iPhone. >> Contour GPS HD
Video Camera <<
Escort / Passport iQ Radar Detector / Laser Detector /
GPS Navigation,
All in one Device click >>
Passport iQ <<
>>
Motion Pro Revolver
Throttle Kit << The best way to improve throttle control, but throttle sensitivity
can be changed mechanically
to suit riding conditions and rider preferences to great advantage no matter
what your level of skill.
BREMBO RSC Kawasaki Replacement Cable Clutch Lever Mechanical clutch lever assembly machined entirely from billet.
Lever boss has special geometry. Plug-and-play design ensures the lever can
mount directly to the original arm lever assembly. Similar in all respects to
the 19RCS Master Cylinder with laser-imprinted Brembo® Racing logo and the
famous tri-color flag on the lever boss.
Perfect Match for your RCS19 Brake RSC Kawasaki Cable Clutch Lever
Sale Price:
$149.95
<<--Click TRUE HIGH INTENSITY DISCHARGE (H.I.D.) LIGHTS
XENON LIGHTS .. KITS Starting at Only - $79.95/each
RACE TECH FORK SPRINGS - for OEM Forks
Race Tech manufactures precision high performance springs that have
a high stiffness to mass ration.
In other words; Race Tech Fork springs are lightweight for the their
partifuclar rate.
This requires the finest materials and processing.
Race Tech OEM Replacement Fork Springs - $105
RACE TECH SHOCK SPRINGS - for OEM Shock
Race Tech HP Springs have a high
stiffness-to-mass ratio. In other words; our springs are light weight
for their particular spring rate. This requires the finest materials and
processing. Shot-peened and pre-set so they cannot sack out. All Race
Tech HP Springs have the highest rate tolerences in the industry. These
are the finest springs in the world-guaranteed.
Race Tech OEM Replacement Shock Springs - $105
Race Techs original bolt-on fork valving system
for cartridge forks
Triples the flow area by putting valving control on the shim stack
instead of the overly restricted stock piston
Outstanding tunability, improved control, traction, plushness and
bottoming resistance
Includes complete instructions, Gold Valve pistons, valving charts, and
valving shims
Race Tech 20mm Gold Valve Fork Kit
for OEM FORKS - $149
TruGel Batteries The Ultimate LONG Lasting Top Quality
Motorcycle Battery. PERIOD.
And Best of All, They are LESS Cost then traditional Lead/acid batteries
The newest offering from the Brembo HP line. The M4 CAST Monobloc Caliper.
Designed with an entry level cost in mind... Using
CAST Alum.
Instead of Billet.
These calipers are of monoblock construction utilizing a unique gravity cast
procedure.
High temperature main seals plus dust seals allow for use on street or on
the track.
Caliper CAST ALUM. bodies are then CNC machined.
Brake pads made from sintered material so & are ideal for use in wet and dry
conditions.
Kit includes instruction manual with all information about fitting,
bleeding, maintenance and more. 108mm
M4 Cast Alum. Calipers
Retail - $1098(Except 07-08 R1)
Price Includes Brembo PADS.
Sale Price - $799.95/set
of 2 Calipers
To See More Information on BREMBO CALIPERS, ROTORS and MASTERCYLINDERS
>> BREMBO<<
Clear LED Tail Lights
w/ Optional Integrated LED Signals (CTL-0080) Only - $99.95
IN STOCK
>>
Clear Tail Lights & LED's <<
Unlike our Competitors, who sell Just a
Circuit Board,
and require you to tear appart your entire Tail Light.....
We sell only the COMPLETETail Light Housing.
Just pop out your stock Tail Light, and Insert this one. OEM Plug for Tail
Light. NOTE: (TAIL Light come with
Turn signal option.
You don't Have to use them, if you don't want to. But, they are
included in the price.)
FENDER ELIMINATOR KIT For Stock Exhausts Setup
(Does NOT work with Aftermarket Exhaust).
Kit includes license plate Bracket with New Tag light, and Flush Mtn Clear Lens Signals.
1K606s - $140.95
$119 IN STOCK +++++++++++++++++++++++++++++++++++
FENDER ELIMINATOR KIT
Ltd. "Race" Kit, for use with Aftermarket Exhausts
ONLY.
Includes Pivot mounted license plate bracket, with New Tag light, and Short Stalk Signals.
1K606Ltd - $160.95$139 IN STOCK
STM Slipper Clutches
Slipper Clutches are now becoming Standard equipment
on more and more
NEW Sport Bikes such as (05-06 GSX-R1000 / 04-06 ZX-10R / 03-06
ZX636/6RR, 06 R6).
Now, STM Has released a Model for nearly ALL Popular Models
STM Slipper Clutches are an excellent Upgrade to High Performance Sport
Bikes.
Run ALL NEW Drag Race
Simulator for Dyno Jet LCD Screen
-
-DYNO JET
LCD DISPLAY
-
- DYNO JET Mult-Function
Hub -
Want To SEE What your bike, and
Power Commander are Doing WITHOUT A COMPUTER.
Do you Want to Switch MAPS on the Fly, or see what gear you are in, or See
what your fuel load is?
Do you want to tweak your map away from your house. Then you want a
Dyno Jet LCD Display.
UNIT
Plugs Directly into Your Power Commander IIIusb. Allows you to
View Maps, Current Speed, Gear Position, RPM, TPS and Much More
Can also Mtn. ON BIKE, in place of Gauges
(On some Bikes)
Click here for More Details
>> LCD DISPLAY
<<
LTD. QTY. IN STOCK
ALL NEW
Brembo "HP" BILLET Brake Calipers
(2 Piece Design) 4
Piston, 2 Pad Setup.
Designed very similar to
the "Racing" Monobloc Calipers.
But, at LESS then half the Cost.
EXCELLENT Upgrade and OEM Fit.
108mm Bolt-Hole Setup
for Most Japanese Sport Bikes, That have Radial Calipers Stock.
Brembo has developed a new caliper with radial attachments that is
interchangeable on the standard radial forks of maxisport class Japanese
machines (HONDA, YAMAHA, SUZUKI, KAWASAKI). With a caliper body machined
from solid metal, special attention was paid to achieving high braking power
and stiffness, utilizing technology derived
directly from race engineering. The product, which is supplied in kit form,
is equipped with sintered brake pads - at the cutting edge of today's
manufacturing technology; the kit also contains an instruction handbook, a
set of Brembo decals, and a series of practical temperature stickers as used
in race conditions to monitor the working temperature of the calipers. The
stickers clearly identify the thoroughbred race pedigree of the brakes.
To assure that we send you the correct spacers, please let us know the make,
model and year of the bike that you plan on putting these calipers on.
Retail - $1718
Sale Price $1389.95- <
BREMBO PRICING >
Price Includes Brembo PADS.
The
floating rotors were developed specifically to provide owners of
Japanese Sportbikes (HONDA, YAMAHA, SUZUKI, KAWASAKI) with the
maximum performance levels on the street and on the track. The
new rotors are available in three diameters and are of greater
thickness than standard rotors. The braking surface features a
series of drilled holes to maximize performance and control when
braking while simultaneously reducing rotating mass with
consequent advantages in terms of machine handling. The braking
surface is connected to the carrier, which is machined from
solid aluminum and is the product of a comprehensive FEM
calculation procedure. The connection is achieved by means of
ten floating- type aluminum buttons, reflecting a strictly race
style engineering project. The kit contains the two rotors, and
a set of Brembo decals.
Retail - $669.95 Sale Price - $292.50/each Disc
x 2- <
BREMBO PRICING >
This kit
is The equivalant of a Set of Ohlins Forks,
Less the Sliders, and Bottoms.
Everything INSIDE a Set of Ohlins RT Forks, comes in this Kit.
• Includes Complete Internal Cartridge
NEW Compression Pistons, NEW Rebound Pistons NEW Piston Rings NEW Shims Complete Set of One-Way Valves, NEW Washers
NEW 25mm Fork Springs
Recommended Track Settings
External rebound Damping External compression Damping External Spring preload adjusters
Same 25mm Fork Springs that
are on the R&T Forks Works with STOCK Fork sliders and bottoms, so it's
SuperSport Legal
In nearly all regions. >> Ohlins
<<
Starlane GPS Lap Timer
w/
Speedometer and RPM Pickup
>> Starlane GPS Lap Timers
<< GPS (Satellite) Technology.
NO Transponder Need. Imagine, No More worrying about setup .Transponders on the
side of the track each time you go out, or
Each time you come in. Those days are done.
Just go out on the track, Set the Start/Finish Line and the GPS (Satellites) Does it all for you. Current Speed, Lap Times, RPM;s, Max Speed, Fastest lap.....and
much more.
You can even Save each track, in memory. NO Wire Splicing, or
taping necessary.
This Unit
Easily transfers from bike to bike. Or you can put it in your car, or
truck, or SUV.
Very handy device.
TYPE R - With TRACK MAPPING. Downloaded to your
PC or Laptop
PIG Spotter Mirrors w/ LED Turn Signals These are the Ultimate Mirrors made from Billet Aluminum with
Convex Lens Offered in: Black / Polished / Chrome
> PIG Spotters <
ALL NEW HARD RACING.com
T-SHIRTS
Dyno Jet, Brembo, Yoshimura Logo on one sleeve
And
Akrapovic, Alpinestars, Ohlins Logo on the other sleeve.
HARDRACING.comT-Shirts & DECALS T-SHIRTS ONLY - $5.95
&
HARD RACING.com DECALS - $0.95 (Not quite Bike Specific, But they do work with all
bikes)
GPR Steering Damper
NO
Drilling required
>>
GPR Steering Damper
<<
Retail - $475
Sale Price - $
Click
GPR
for Sale Price
CRG Levers are Carved from aluminum.
They are beautiful
as well as functional.
CRG Levers are Designed to be bolt on replacements, fully adjustable.
Available in Gold or Gray.
A few Select CRG Levers are available in a short lever version. (
1.25" Shorter ) Learn More or Buy Now >
CRG Levers <
- $84.95
& Up IN STOCK
K&N High Flow Air Filter(KA6005) - $52.95
IN STOCK
ZX-636/6RR
These Signals are a Direct replacement of stock OEM turn signals for
2005 ZX636/6RR
No drilling, cutting, or other modifications needed. Turn signals are sold in pairs
(2 per pack) bulbs included... These front "EURO STYLE" turn signals are molded
into the shape of the fairing for an aerodynamic and a trick look.
Simple & easy to install, they will mount into the stock location in just few
minutes. Unlike Our Competitors, OUR FRONT Signals ARE
DOT LEGAL. "Euro Style" Front Signals
- CLEAR or SMOKE
CTS-0048 (Clear)
- $69.99IN STOCK CTS-0048s
(Smoke)
- $69.99
IN STOCK
Clear LED Tail Lights
w/ Optional Integrated LED Signals (CTL-0080) Only - $99.95
IN STOCK
>>
Clear Tail Lights & LED's <<
Unlike our Competitors, who sell Just a
Circuit Board,
and require you to tear appart your entire Tail Light.....
We sell only the COMPLETETail Light Housing.
Just pop out your stock Tail Light, and Insert this one. OEM Plug for Tail
Light. NOTE: (TAIL Light come with
Turn signal option.
You don't Have to use them, if you don't want to. But, they are
included in the price.)
CRG Levers are Carved from aluminum.
They are beautiful
as well as functional.
CRG Levers are Designed to be bolt on replacements, fully adjustable.
Available in Gold or Gray.
A few Select CRG Levers are available in a short lever version. (
1.25" Shorter ) Learn More or Buy Now >
CRG Levers <
- $89.95
& Up
Direct replacement of stock OEM
REAR turn signals for ZX10R No
drilling, cutting, or other modifications needed. Turn signals are sold in pairs
(2 per pack) bulbs included...
This is a complete unit w/ connector.
Same as the rear turnsignals used on European models. Will fit all US model
ZX-10R.
Unlike Our Competitors, OUR
Turn Signals ARE
DOT LEGAL. CLEAR "Euro Style"
REAR Signals - 04-05 ZX-10R &
'05-'06 ZX-636/6RR
CTS-0036 - $49
IN STOCK
This kit
is The equivalant of a Set of Ohlins Forks,
Less the Sliders, and Bottoms.
Everything INSIDE a Set of Ohlins RT Forks, comes in this Kit.
• Includes Complete Internal Cartridge
NEW Compression Pistons, NEW Rebound Pistons NEW Piston Rings NEW Shims Complete Set of One-Way Valves, NEW Washers
NEW 25mm Fork Springs
Recommended Track Settings
External rebound Damping External compression Damping External Spring preload adjusters
Same 25mm Fork Springs that
are on the R&T Forks Works with STOCK Fork sliders and bottoms, so it's
SuperSport Legal
In nearly all regions.
<< to become a Fan or Friend. 
$119 IN STOCK
The
floating rotors were developed specifically to provide owners of
Japanese Sportbikes (HONDA, YAMAHA, SUZUKI, KAWASAKI) with the
maximum performance levels on the street and on the track. The
new rotors are available in three diameters and are of greater
thickness than standard rotors. The braking surface features a
series of drilled holes to maximize performance and control when
braking while simultaneously reducing rotating mass with
consequent advantages in terms of machine handling. The braking
surface is connected to the carrier, which is machined from
solid aluminum and is the product of a comprehensive FEM
calculation procedure. The connection is achieved by means of
ten floating- type aluminum buttons, reflecting a strictly race
style engineering project. The kit contains the two rotors, and
a set of Brembo decals.
