New Parts / Updated: 5-6-08
We update these pages often.
Be sure to hit REFRESH on your browser, each time you check this page.
Or it may Not Show the new parts.
AVAILABLE NOW
The All New PCIIIusb & Dyno Jet Quick
Shifters:
Featuring: State of the Art Technology
New Mapping methods, USB Port For Easier & Faster
Transfer and Auxiliary Data Port for Future Add-ons.
Get One Now, Before they are all on Back Order.
'08-'09 GSX-R600
PCIIIusb (342-411)
ON SALE - $265 '08-'09 GSX-R750
PCIIIusb (343-411)
ON SALE - $265
For More Details: & Buy
It Now >> DynoJet Power
Commanders PCIIIusb <<
The Dynojet Quick Shifter Sensors are compatible with USB Power
Commander ONLY and allow "full throttle, clutch-
less" upshifts. These high quality sensors provide fast, accurate and
reliable shifting in conjunction with the Power Commander. Sensors are
attached to the gear linkage and connect into the Power Commander expansion
port. All sensors include a Software utility which allows the user to adjust
the "Kill Time" and "Minimum RPM Shift Point" within the Power Commander
Control Center Software. "Please note these are
NOT Power Shifters. They do
NOT shift for you. They
allow "full throttle, clutch- less" upshifts, by cutting the Fuel
or Spark for a split second as you start to shift
with your foot..
Dyno Jet Quick Shifters:
'06-'08 GSX-R600 ON SALE - $238
IN STOCKRequires Ignition
Module '06-'08 GSX-R750
ON SALE - $238
IN STOCKRequires Ignition
Module
Buy It Now >>
DynoJet
Quick Shifters <<
For more information,
please refer to the guide belo: Linkage Adapters ONLY Sold w/ Quick Shifters.(Not sold Separately)
Linear Sensors are universal..
Shift Rod Sensors require the gear linkage tie-rod to be modified. We are developing a
range of tie-rods for the popular models, as well as universal tie-rods that are
specifically designed to give maximum adjustment, allowing a combination of different M6
right hand and left hand male and female threads over a wide range of 160mm to 280mm. This
will allow easy installation on many models as well as some custom rear-set applications..
<-click
CBR1000RR Dyno Map, showing nearly 4 HP Gain, everywhere, With JUST the Ign.
Module changes.
Some bike have shown gains over 8 hp, in certain areas, by simply changing
the Ignition Timing.
Power Commander Ignition Module
An Add-On
Power Commander Ignition Module
for Power Commander USB’s,
are available NOW. These modules will plug directly into the PCIIIUSBs expansion port and the
bikes ignition coils. Dynojet
Ignition Modules
use the latest in direct coil driver technology. Both advancing and
retarding of the ignition timing at specific throttle postion and rpm combination will be
possible. In Advanced Mode, the tuner will be able to set the timing for each
cylinder individually.
When tuned correctly, the Ignition module has potential to make excellent HP
Gains Through out the RPM Range. The Ignition Module will Also
allow the User to increase his Rev. Limiter of the Bike, Enabling them to
Tap the Most power
possible from the engine.
(Note, this does require a signed waiver form) The
Power Commander Ignition
Module will be
available for popular sport bike models.
This does not apply to Harley Davidson model Power Commander USBs, as they include
ignition timing adjustment ability as part of the base unit..
The Dynojet Ignition Module is an “add on” accessory for
select Power Commander III USB. It allows you to control and adjust the
ignition timing of your motorcycles’ engine.
The Dynojet Ignition Module is connected to the PCIII USB with it’s built in
expansion port link and communicates via a CAN interface. As in the case of
the Power Commander, the Dynojet Ignition Module uses OEM style connectors
to plug in-line of the stock ignition harness so no cutting or splicing is
required.
The Dynojet Ignition Module uses “direct coil driver technology” and allows
a high degree of timing adjustment. In the Power commander Control Center
Software the user is able to advance or retard the ignition curve up to 10
degrees based on throttle position and RPM. It is also possible to alter the
timing for each cylinder individually if necessary.
The Ignition Module comes standard
with no adjustments made in the map for the timing table. Due to different
states of tune, fuel quality, and engine modifications we found it is best
to leave the ignition timing stock for safety reasons.
On motorcycles that have eight injectors and were not previously able to
benefit from the use of the Dynojet Quick Shifter, the Ignition Module now
allows this functionality. The Dynojet Quick Shifter is connected to the
expansion port between the Ignition Module and the PCIIIusb.
Starlane GPS Lap Timer
w/
Speedometer and RPM Pickup
>> Starlane GPS Lap Timers
<< GPS (Satellite) Technology.
NO Transponder Need. Imagine, No More worrying about setup .Transponders on the
side of the track each time you go out, or
Each time you come in. Those days are done.
Just go out on the track, Set the Start/Finish Line and the GPS (Satellites) Does it all for you. Current Speed, Lap Times, RPM;s, Max Speed, Fastest lap.....and
much more.
You can even Save each track, in memory. NO Wire Splicing, or
taping necessary.
This Unit
Easily transfers from bike to bike. Or you can put it in your car, or
truck, or SUV.
Very handy device.
TYPE R - With TRACK MAPPING. Downloaded to your
PC or Laptop
>>
Yoshimura <<
Systems and Slip-ons
R-55 Slip-ons. w/ Carbon End Cap.
LTD. QTY. IN STOCK
Run ALL NEW Drag Race
Simulator for Dyno Jet LCD Screen
-
-DYNO JET
LCD DISPLAY
-
- DYNO JET Mult-Function
Hub -
Want To SEE What your bike, and
Power Commander are Doing WITHOUT A COMPUTER.
Do you Want to Switch MAPS on the Fly, or see what gear you are in, or See
what your fuel load is?
Do you want to tweak your map away from your house. Then you want a
Dyno Jet LCD Display.
UNIT
Plugs Directly into Your Power Commander IIIusb. Allows you to
View Maps, Current Speed, Gear Position, RPM, TPS and Much More
Can also Mtn. ON BIKE, in place of Gauges
(On some Bikes)
Click here for More Details
>> LCD DISPLAY
<<
LTD. QTY. IN STOCK
CRG Levers are Carved from
aluminum.
They are beautiful
as well as functional.
CRG Levers are Designed to be bolt on replacements, fully adjustable.
Available in Gold or Gray.
A few Select CRG Levers are available in a short lever version.
( 1.25" Shorter ) Learn More or Buy Now >
CRG Levers <
- $84.95 & Up IN STOCK
PIG Spotter Mirrors w/ LED Turn Signals These are the Ultimate Mirrors made from Billet
Aluminum with Convex Lens Offered in: Black / Polished / Chrome
> PIG Spotters <
This kit is The equivalant of a Set of Ohlins Forks,
Less the Sliders, and Bottoms.
Everything INSIDE a Set of Ohlins RT Forks, comes in this Kit.
•
Includes Complete Internal Cartridge
NEW Compression Pistons, NEW Rebound Pistons NEW Piston Rings NEW Shims Complete Set of One-Way Valves, NEW Washers
NEW 25mm Fork Springs
Recommended Track Settings
External rebound Damping External compression Damping External Spring preload adjusters
Same 25mm Fork Springs that
are on the R&T Forks Works with STOCK Fork sliders and bottoms,
so it's SuperSport Legal
In nearly all regions.
ALL NEW
FOR 2006
Brembo "HP"
BILLET Brake Calipers
(2 Piece Design) 4
Piston, 2 Pad Setup.
Designed very similar to
the "Racing" Monobloc Calipers.
But, at LESS then half the Cost.
EXCELLENT Upgrade and OEM Fit.
108mm Bolt-Hole Setup
for Most Japanese Sport Bikes, That have Radial Calipers Stock.
Brembo has developed a new caliper with radial attachments that is
interchangeable on the standard radial forks of maxisport class Japanese
machines (HONDA, YAMAHA, SUZUKI, KAWASAKI). With a caliper body machined
from solid metal, special attention was paid to achieving high braking power
and stiffness, utilizing technology derived
directly from race engineering. The product, which is supplied in kit form,
is equipped with sintered brake pads - at the cutting edge of today's
manufacturing technology; the kit also contains an instruction handbook, a
set of Brembo decals, and a series of practical temperature stickers as used
in race conditions to monitor the working temperature of the calipers. The
stickers clearly identify the thoroughbred race pedigree of the brakes.
To assure that we send you the correct spacers, please let us know the make,
model and year of the bike that you plan on putting these calipers on.
Retail - $850.95
Sale Price -
$749/each Caliper
Price Includes Brembo PADS.
The
floating rotors were developed specifically to provide owners of Japanese
Sportbikes (HONDA, YAMAHA, SUZUKI, KAWASAKI) with the maximum performance
levels on the street and on the track. The new rotors are available in three
diameters and are of greater thickness than standard rotors. The braking
surface features a series of drilled holes to maximize performance and
control when braking while simultaneously reducing rotating mass with
consequent advantages in terms of machine handling. The braking surface is
connected to the carrier, which is machined from solid aluminum and is the
product of a comprehensive FEM calculation procedure. The connection is
achieved by means of ten floating- type aluminum buttons, reflecting a
strictly race style engineering project. The kit contains the two rotors,
and a set of Brembo decals.
Retail - $669.95
Sale Price -
$298/each Disc x 2
Ohlins
SUPERSPORT FORK
VALVE KIT
"Compression & Rebound Valves"
(For use with STOCK FORKS)
• Kit
Improves Comfort & Performance of Stock Forks
• Includes NEW Compression Pistons,
Rebound Pistons, Piston Rings,
Shims, One-Way Valves, Washers, and
Recommended Track Settings
• Bolt-On Installation For ALL Stock Forks
• Recommended For "STREET or RACE"
3200-01
-
IN STOCK >>
OHLINS <<
The long-awaited TRC system for the '06-'08
GSX-R600/750 is here! The slip-on TRC systems feature our unique BPM "Belly Pan
Muffler" which replaces the catalytic converter and features a 12 inch "Shorty"
canister. This unique dual muffler set-up is exclusive to these bike models and
is also available for the '06-'08
Yamaha R6. These systems are going fast. >>
Yoshimura <<
STM Slipper Clutches
Slipper Clutches are now becoming
Standard equipment on more and more
NEW Sport Bikes such as (05-06
GSX-R1000 / 04-06 ZX-10R / 03-06
ZX636/6RR, 06 R6).
Now, STM Has released a Model for nearly ALL Popular Models
STM Slipper Clutches are an excellent Upgrade to High
Performance Sport Bikes.
<Click> the Logo to Take a Look at their Web-site
Once you decide what you like, Just E-Mail or Call
(704-799-2192) For Lowest Pricing
CHECK YOUR BIKES SPECIAL PAGE OFTEN....... WE ARE ALWAYS
UPDATING AS SOON AS NEW PARTS BECOME AVAILABLE.
Call (704-799-2192) or E-Mail Us.
Each Year, when the “ALL NEW”
models are released it takes anywhere from
2 weeks up
to 4 months for new parts to get released to the public.
The Parts Manufacturer’s
have to get the bikes, make the prototypes. Test the protype.
If it works correctly, then they Manufacturer volumes, and then get them to the
dealers.
This takes time. It’s just part of life.
Meanwhile, customers like yourself, are anxiously waiting to get the newest
and coolest products… NOW.
And each year, many of you will wait until the product
is released to order it.
But, by the time the product is released, the demand far exceeds the supply.
Meaning 100
customers want Product X, but only 30
units arrive in the first shipment to the U.S. So, that means 70 customers have to wait another 2-4 weeks
for more product to become available.
Because Soo many others have already placed their orders, you have to wait
even longer to get yours.
Well, there is a way to fix that.
This
year we are encouraging our customers to order early.
There is absolutely, NO RISK. NON AT ALL.
We will NOT Charge your credit card until the product is ready to ship
to you. PERIOD.
NO Deposit, NO Cancellation Fee’s, NO BS.
And you may cancel your
order at anytime. We have no problem with that.
The demand for these new parts is soo high, if you cancel, we just go down the
list,
and make the next customer the happiest man in town.
So, you have Nothing to
lose… and soo much to gain.
The sooner you put your
order in for a new part, the higher up on the list you get.
That way, when the new part gets released, you get first dibbs over everyone
else.
It doesn’t matter if there is a price yet or a even a
part number.
Just tell us what bike, and what part, and Your Order is LOCKED.
PERIOD. It's that easy.
We will call you the day the part is ready to ship, and give you final decision
if you still want it.
If you say “YES”…. we will ship it immediately.
If you say “NO”, we will cancel the order and move down the list to the next
customer.
NOTHING TO LOSE……… Yet Soo much to gain.
Don’t wait till the last
minute. If you have a part you want to order, CALL US
now or >Order On-Line<
ONE MORE TIME….. DON’T WAIT.
You know the saying, “You snooze, You lose”.
** Please note,
the No cancellation fee ONLY applies to "ALL NEW" Parts that have not been
released yet.
It does NOT apply to
"Special Order Parts" that have already been released to the public and are no
longer in demand.