The All New PCIIIusb , PCV's &  Dyno Jet Quick Shifters:
Featuring: State of the Art Technology
New Mapping methods, USB Port For Easier & Faster
Transfer and Auxiliary Data Port for Future Add-ons.
Get One Now, Before they are all on Back Order. 

PCIIIusb    ON SALE - $265    ( IN STOCK)
PCV    ON SALE - $269   ( IN STOCK)
For More Details: & Buy It Now >> DynoJet Power Commanders   PCIIIusb  <<




Dyno Jet Secondary Fuel Module >> SFM <<
ON SALE - $219
Allows PCV to control ALL 8 Injectors

The Quick Shifter Expansion Moduel (QEM) allows the Dynojet Quick Shifter sensor to be used with the Power Commander V on bikes that have 8 INJECTORS. The Q.E.M. connects to the upper injectors and then into the PCV. Once the sensor is attached you will have full Quick Shifter functionality at the LOWEST COST POSSIBLE!

TO PLACE ORDER For QEM  click- >> QEM  <<

The Dynojet Quick Shifter Sensors are compatible with USB Power Commander ONLY and allow "full throttle, clutch- less" upshifts. These high quality sensors provide fast, accurate and reliable shifting in conjunction with the Power Commander. Sensors are attached to the gear linkage and connect into the Power Commander expansion port. All sensors include a Software utility which allows the user to adjust the "Kill Time" and "Minimum RPM Shift Point" within the Power Commander Control Center Software.  "Please note these are NOT Power Shifters.  They do NOT shift for you.  They allow "full throttle, clutch- less" upshifts, by cutting the Fuel or Spark  for a split second as you start to shift with your foot..      Dyno Jet PCIIIusb Quick Shifters:  ON SALE - $197  Requires Ignition Module    Buy It Now >> DynoJet Quick Shifters  <<  Dyno Jet PC V Quick Shifter:  ON SALE - $179    (Requires: Quick Shifter Expansion Module (Q.E.M.)    More Information   ->> DynoJet Quick Shifters  <<

For more information, please refer to the guide belo: Linkage Adapters ONLY Sold w/ Quick Shifters.(Not sold Separately) Shift Rod Installation Guide Pdf | Zip

Linear Sensors  are universal.. Shift Rod Sensors require the gear linkage tie-rod to be modified. We are developing a range of tie-rods for the popular models, as well as universal tie-rods that are specifically designed to give maximum adjustment, allowing a combination of different M6 right hand and left hand male and female threads over a wide range of 160mm to 280mm. This will allow easy installation on many models as well as some custom rear-set applications..

    <-click
CBR1000RR Dyno Map, showing nearly 4 HP Gain, everywhere, With JUST the Ign. Module changes.
Some bike have shown gains over 8 hp, in certain areas, by simply changing the Ignition Timing.

Power Commander Ignition Module    
 

An “Add-On” Power Commander Ignition Module for Power Commander USB’s, are available NOW.
These modules will plug directly into the PCIIIUSB’s expansion port and the bike’s ignition coils. Dynojet Ignition Modules use the latest in “direct coil driver technology.” Both advancing and retarding of the ignition timing at specific throttle postion and rpm combination will be possible. In “Advanced Mode,” the tuner will be able to set the timing for each cylinder individually.
When tuned correctly, the Ignition module has potential to make excellent HP Gains Through out the RPM Range.
The Ignition Module will Also allow the User to increase his Rev. Limiter of the Bike, Enabling them to Tap the Most power
possible from the engine. (Note, this does require a signed waiver form)
The Power Commander Ignition Module will be available for popular sport bike models. 
This does not apply to Harley Davidson model Power Commander USB’s, as they include ignition timing adjustment ability as part of the base unit..

The Dynojet Ignition Module is an “add on” accessory for select Power Commander III USB. It allows you to control and adjust the ignition timing of your motorcycles’ engine.

The Dynojet Ignition Module is connected to the PCIII USB with it’s built in expansion port link and communicates via a CAN interface. As in the case of the Power Commander, the Dynojet Ignition Module uses OEM style connectors to plug in-line of the stock ignition harness so no cutting or splicing is required.

The Dynojet Ignition Module uses “direct coil driver technology” and allows a high degree of timing adjustment. In the Power commander Control Center Software the user is able to advance or retard the ignition curve up to 10 degrees based on throttle position and RPM. It is also possible to alter the timing for each cylinder individually if necessary.
 

 The Ignition Module comes standard with no adjustments made in the map for the timing table. Due to different states of tune, fuel quality, and engine modifications we found it is best to leave the ignition timing stock for safety reasons.

On motorcycles that have eight injectors and were not previously able to benefit from the use of the Dynojet Quick Shifter, the Ignition Module now allows this functionality. The Dynojet Quick Shifter is connected to the expansion port between the Ignition Module and the PCIIIusb.
 Regular Price - $361  ON SALE - ON SALE - $285  IN STOCK
Buy it Now >> DynoJet Ignition Modules  <<

  


Brembo RCS19  Brake Mastercylinder w/ FOLDING Lever  (RCS 19)
The revolutionary aspect of the Brembo RCS19 Brake Mastercylinder is the ability to choose between the 19x18 and 19x20 configuration. If you have read about Brembo Master Cylinders, you will know what these numbers mean and that there is a trade-off between the two pivot configurations. Not to say that either configuration is bad, but the rider had to choose between varying degrees of feel and power. Now the rider can change the configuration to suit their needs. No more compromises!
Another unique aspect to the RCS19 is it comes with a microswitch for the brake.
For racers, the adjuster knob has been relocated to the same position as the 19x18 Billet Folding Brake Master Cylinder that is used by Valentino Rossi and Nicky Hayden in MotoGP and WorldSuperBike. Two springs have been installed to ensure constant contact between the lever and the pushrod to ensure a longer lifespan.
The Brembo 19RCS brake master cylinder retains features that made Brembo the top brake system manufacturer today including forged CNC-machined construction and a folding lever that reduces crash damage.     
RCS19   Sale Price: $319.95      
(Order this Brembo MC on-line, and receive Free EXPRESS Shipping )
  IN STOCK

 

BREMBO RSC  HONDA  Replacement Cable Clutch Lever
Mechanical clutch lever assembly machined entirely from billet. Lever boss has special geometry. Plug-and-play design ensures the lever can mount directly to the original arm lever assembly. Similar in all respects to the 19RCS Master Cylinder with laser-imprinted Brembo® Racing logo and the famous Italian tri-color flag on the lever boss.  Perfect Match for your RCS19 Brake
RSC  Yamaha Cable Clutch Lever   Sale Price: $149.95      
Fits These Model Bikes ONLY:  '07-'11 CBR600RR  /  '08-'11 CBR1000RR

Brembo ZO4 Upgraded Pads for OEM Calipers
Sale Price $123-$231
>> BREMBO <<






Don't take chances with a Flat, or leaking Tire which can cause a crash or accident on your bike.
This system is very Easy to install.  Takes only about 3-5 min. installation
Completely Wireless.
>> Tire Pressure Monitoring System (TMPS) <<

 

Anti-Gravity SuperLight
 Lithium Batteries






Full Spectrum Power Ultra Light Weight 
"Pulse"  P1, P2, P3 Lithium. Batteries

 

>> Carrozzeria Forged Aluminum Wheels <<
Starting at only - $1689

Worlds Lightest Weight High Definition Video Camera w/ GPS Mapping Technology.
NOW, you can see where you where you Recorded your Video, and How Fast you were going
Where you went,  and What Altitude, ALL on the Same Screen, At the same time. All from this Little Camera.
And soon to be release Blue Tooth Apps. to connect to your Android Mobile Phone, and  iPhone.
 >> Contour GPS  HD Video Camera <<

Escort / Passport iQ  Radar Detector / Laser Detector / GPS Navigation,
All in one Device   click >> Passport iQ <<

KOSO Gauges
RX-1N  /  RX-2  /  RX-2N

-  DRIVEN CLip-ons -

 

>> TWO BROTHERS ALUMINUM RACING STANDS <<


 

RACE TECH FORK SPRINGS - for OEM Forks


Race Tech manufactures precision high performance springs that have a high stiffness to mass ration.
In other words; Race Tech Fork springs are lightweight for the their partifuclar rate.
This requires the finest materials and processing.
Race Tech OEM Replacement Fork Springs - $105 

RACE TECH SHOCK SPRINGS - for OEM Shock


Race Tech HP Springs have a high stiffness-to-mass ratio. In other words; our springs are light weight for their particular spring rate. This requires the finest materials and processing. Shot-peened and pre-set so they cannot sack out. All Race Tech HP Springs have the highest rate tolerences in the industry. These are the finest springs in the world-guaranteed.
Race Tech OEM Replacement Shock Springs - $105 

Race Tech 20mm GOLD VALVE FORK KIT FMGV2040  for OEM Forks


Race Techs original bolt-on fork valving system for cartridge forks
Triples the flow area by putting valving control on the shim stack instead of the overly restricted stock piston
Outstanding tunability, improved control, traction, plushness and bottoming resistance
Includes complete instructions, Gold Valve pistons, valving charts, and valving shims
Race Tech 20mm Gold Valve Fork Kit  for OEM FORKS  - $149 
 

>> Motion Pro Revolver Throttle Kit <<
The best way to improve throttle control, but throttle sensitivity can be changed mechanically
to suit riding conditions and rider preferences to great advantage no matter what your level of skill.

              <<--Click
TRUE HIGH INTENSITY DISCHARGE (H.I.D.) LIGHTS
XENON LIGHTS .. KITS Starting at Only - $79.95/each

>> HID LIGHT CONVERSION KITS <<

Shogun Crash Kits
Kits Include:  (Frame Sliders, Bar ends Sliders, & Swing Arm Spool/Sliders)
>>  Crash Kits  <<
 

GoPRO HERO2   High Definition HD  Camera Kit




 

Only for  2009 CBR600RR  &  08-09 CBR1000RR
>> DYNO JET IRC <<
$58.95
VERY LIMITED QTY.  IN STOCK

Ohlins ALL NEW 30mm NIX Fork Cartridge Kits
&
FGR PRESSURIZED
>> CARTRIDGE KITS <<
LIMITED TIME ONLY... SUPER SALE PRICE
PACKAGE DEAL  30mm Kit and Shock.... Only - $2250
Limited QTY.  IN STOCK
The new Road&Track 30 mm front fork cartridge kit from Öhlins is based on experience gained from World Supersport and Superstock Championships. It doesn’t matter if you are heading for a National Roadracing title or if you are taking your bike to the local race track. The NIX 30mm cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.  Greater Surface Area translates into more control, less negative pressure on the back side of the piston virtually eliminating cavitation commonly found on other brands of cartridge kits.  These 30mm NIX Cartridge  Kit has a unique design with compression damping and adjuster on the left leg and rebound damping and adjuster on the right leg –
i.e. all adjustments are on the TOP of the Forks Together, with the Spring Pre-Load adjusters.

 

Barnett Clutch Packs
Packs include Steel Plates and Fiber Plates. 
Each pack is  - BIKE SPECIFIC. 
SALE PRICE - Starting @ $131 + Up    
 

TruGel Batteries
The Ultimate LONG Lasting Top Quality Motorcycle Battery.  PERIOD.
And Best of All, They are LESS Cost then traditional Lead/acid batteries

 >> OHLINS FORK SPRINGS <<
(Upgrade Replacement for OEM Forks)

Ohlins Shock Springs  for Ohlins SHOCKS

Replacement Springs for your Ohlins Shock. 
Springs Rates available from 70N/mm up to 135N/mm
Sale Price - $89
  IN STOCK  

Timing Retard Calibrator only for '09-'10 CBR600RR

The Z-BOMB is a Timing Retard Calibrator that maximizes engine performance for up to a 7 HP gain over stock. That's a pretty impressive power boost for such a Small Price. The simple, plug-in unit installs in minutes with just a screwdriver and a 5mm hex key. The Z-Bomb integrates perfectly with all Z-Fi EMS products as well as other aftermarket tuning units.

•    Bazzaz Claims Gains 5-7 HP over stock
•    Plugs in-line with TPS (Throttle Position Sensor)
•    Easy to Install with just a screwdriver and a 5mm hex key
  <<  - Click to See DYNO CHARTS
SALE PRICE - $129.95 
We HIGHLY recommend using the Z BOMB product in
conjunction with either a Bazzaz fuel management system or a Dyno Jet PCIIIusb .


 

>> DRIVEN AXLE BLOCK SLIDERS <<
 

  
Plug-n-Play
> FRONT L.E.D. Turn Signals <


 

 
>> Puig Windscreens <<
From $67.95  +  

07-08  CBR's  Puig Rear Hugger - $159.95
Carbon Look w/  Laser Etched CBR Alum. Plate

ALL NEW  Brembo "M4"  CAST
MONOBLOC FRONT CALIPERS


The newest offering from the Brembo HP line. The M4 CAST Monobloc Caliper.
Designed with an entry level cost in mind... Using CAST Alum. Instead of Billet.
These calipers are of monoblock construction utilizing a unique gravity cast procedure.
High temperature main seals plus dust seals allow for use on street or on the track.
Caliper CAST ALUM. bodies are then CNC machined.
Brake pads made from sintered material so & are ideal for use in wet and dry conditions.
Kit includes instruction manual with all information about fitting, bleeding, maintenance and more.
108mm M4 Cast Alum. Calipers    Retail - $1098  (Except 07-08 R1)
Price Includes Brembo PADS. 
Sale Price - $799.95/set of 2 Calipers  
To See More Information on BREMBO CALIPERS, ROTORS and MASTERCYLINDERS >> BREMBO<<




 

Hotbodies Color Matched Rear Huggers, and VENTED Front Fenders
>>  HOTBODIES <<
 

    
Marchesini FORGED Magnesium & Aluminum Rims

 >> Vortex Racing BILLET Engine Covers <<
 

 
Pro Rails / Crash Protector Bars

GILLES Tooling ALL NEW TECA  Chain Adjusters.  Gilles Lifters, and Gilles CRASH PADS, ALL SOLD SEPERATELY.    Available NOW.
     
GILLES Swing Arm Lifters &
TECA Chain Adjusters 

>> Ti-Force <<
DISTRIBUTOR INVENTORY REDUCTION
SUPER BLOW OUT SALE
 As much as 50% off
 

- OZ Wheels -

 

SPEEDO - TUNER - CALIBRATOR
 

>> Akrapovic Exhausts <<
IN STOCK - Ltd. Qty
SAME As FACTORY RACE TEAMS USE.

 

Slip-ons and Full Systems
>> Yoshimura <<
...VERY LIMITED SUPPLY...

Vortex Mirror Block Off Plates

 

>> Jardine Performance Exhausts <<




 

>> K Tech Shocks and Cartridge Kits  <<

 
>> CRG  REAR SETS <<




 

MICHELIN  RACING LONG SLEEVE SHIRTS  
Only - $9.95 

  
"The Future of Performance."
>> M4 Exhaust <<

 

>> GPR Steering Damper  <<
Retail - $500 Sale Price - $  Click  GPR  for Sale Price
V4 MODEL
 
 

 
>> Pro Bolts and Fastener Kits <<

SEQUENTIAL TAILLIGHTS

Clear LED Tail Lights w/ Optional  Integrated  LED Signals

'07-'08 CBR600RR
Sequential Tail Light - Only - $97.95
INVENTORY BLOW OUT SALE..
Unlike our Competitors, who sell Just a Circuit Board,
and require you to tear appart your entire Tail Light.....
We sell only the COMPLETE Tail Light Housing.
Just pop out your stock Tail Light, and Insert this one.
OEM Plug for Tail Light.
NOTE: (TAIL Light come with Turn signal option. 
You don't Have to use them, if you don't want to.  But, they are included in the price.)

We ALSO Offer some of our Tail Lights in a
SEQUENTIAL TAIL LIGHT VERSION as shown here.
>> Clear Tail Lights & LED's <<
 

>> Akrapovic Exhausts <<
IN STOCK - Ltd. Qty
SAME As FACTORY RACE TEAMS USE.

 

Slip-ons and Full Systems
>> Yoshimura <<
...VERY LIMITED SUPPLY...

KR TUNED
Slip-ons and Full Systems
 

Starlane Digital Gear Indicator
w/ Integrated Shift Light

Starlane Digital Gear Inditcator

Gilles Rear Sets  Starting at - $459
   Ltd. Qty.   IN STOCK    
 

'07-'08 CBR600RR  TTX36 (HO789) 
IN STOCK  
 Click >>  Ohlins Shock  <<
 

BAZZAZ PERFORMANCE
Z-FI  &    Z-FI Quick Shifters 
Z-FI TC (Traction Control)
LTD QTY.... IN STOCK





 

  VORTEX Race Stands 
Folds For Easy Storage/Travel

>> Akrapovic Exhausts <<
IN STOCK - Ltd. Qty
SAME As FACTORY RACE TEAMS USE.

>> Vortex Full Adjustable Rear Sets    <<
Retail - $409  starting at Sale Price - $299 Click Link
NOW Available in BLACK OR SILVER
IN STOCK



 

     
     
Run ALL NEW Drag Race Simulator for Dyno Jet LCD Screen

-
- DYNO JET  LCD DISPLAY -     - DYNO JET  Mult-Function Hub - 
Want  To SEE What your bike, and Power Commander are Doing WITHOUT A COMPUTER.
Do you Want to Switch MAPS on the Fly, or see what gear you are in, or See what your fuel load is?
Do you want to tweak your map away from your house.  Then you want a Dyno Jet LCD Display.
UNIT Plugs Directly into Your Power Commander IIIusb.  Allows you to View Maps, Current Speed, Gear Position, RPM, TPS and Much More Can also Mtn. ON BIKE, in place of Gauges (On some Bikes)
  Click here for More Details     >>  LCD DISPLAY  <<
LTD. QTY.  IN STOCK

Helmet/Bike Camera & Digital Video Recorder (DVR) & MP3 Player
w/ LCD Screen
Complete Kit
LTD. QTY.  IN STOCK

  
CRG Levers are Carved from aluminum.
They are beautiful as well as functional.
CRG Levers are Designed to be bolt on replacements, fully adjustable.
Available in Gold or Gray. 
A few Select CRG Levers are available in a short lever version. ( 1.25" Shorter )
Learn More or Buy Now >  CRG Levers <    - $84.95 & Up  IN STOCK



 

>> TWO BROTHERS <<

Starlane  GPS  Lap Timer  w/ Speedometer and RPM Pickup

>> Starlane GPS Lap Timers  <<
GPS (Satellite) Technology.   NO Transponder Need.
Imagine, No More worrying about setup .Transponders on the side of the track each time you go out, or
Each time you come in.  Those days are done. 
Just go out on the track, Set the Start/Finish Line and the GPS (Satellites) Does it all for you.
Current Speed, Lap Times, RPM;s, Max Speed, Fastest lap.....and much more.
You can even Save each track, in memory.  NO Wire Splicing, or taping necessary.
This Unit Easily transfers from bike to bike.  Or you can put it in your car, or truck, or SUV.
Very handy device. 



TYPE R  - With TRACK MAPPING.  Downloaded to your PC or Laptop


 

>> GPR Steering Damper  <<
Retail - $500 Sale Price - $  Click  GPR  for Sale Price
V4 MODEL
 


 

   
           Starlane Digital Dash      Optional GPS Receiver Offering Track Mapping

     
 (CLEAR & DRK. SMOKE )   
From $79.95  - $82.95  
 

Hyper-White Xenon Bulbs - $29.95 IN STOCK
(Similar to New BMW/Mercedes Lights)



 

VORTEX  (Starting at - $63) 
IN STOCK
(Requires Fairing Modifications)






 

SCORPIO ALARMS
w/ FM PAGER Remote

BREMBO Mastercylinders - $260 + Up  IN STOCK

Sato Rear Sets -  (Gold, Silver, Black)
IN STOCK

'07-'08 CBR600RR  TTX36 (HO789) 
IN STOCK  
 Click >>  Ohlins Shock  <<
 

GALFER SS BRAKE LINE KITS ($59- $131)  

BMC High Flow Air Filters
 

 
'07-'08  CBR600RR  Fender Eliminator Kit
1H607  - $119.95         $97.95
Includes Solid Mtn. Tag Bracket, and New Turn Signals.  Retains Stock Tag Light
      (Exactly As Shown)

 

'07-'08  CBR600RR  Fender Eliminator  LTD  Kit
Includes Hinge Style Tag Bracket  and Turn Signals and  LED Tag Light
1H607 Ltd   Price: $149.95    SALE  $125.95

 

 >> LEO VINCE <<
Slip-ons and Systems

   K&N High Flow Air Filter   IN STOCK
(HA6007) - $68.95

    



 HARDRACING.com    T-Shirts  &  DECALS
ONLY - $5.95   &    $.95
(Not quite Bike Specific, But they do work with all bikes)

ALL NEW 
Brembo "HP" BILLET Brake Calipers  (2 Piece Design)
4 Piston,  2 Pad Setup.
Designed very similar to
the "Racing" Monobloc Calipers.
But, at LESS then half the Cost.
EXCELLENT Upgrade and OEM Fit.
108mm  Bolt-Hole Setup
for Most Japanese Sport Bikes, That have Radial Calipers Stock.
Brembo has developed a new caliper with radial attachments that is interchangeable on the standard radial forks of maxisport class Japanese machines (HONDA, YAMAHA, SUZUKI, KAWASAKI). With a caliper body machined from solid metal, special attention was paid to achieving high braking power and stiffness, utilizing technology derived directly from race engineering. The product, which is supplied in kit form, is equipped with sintered brake pads - at the cutting edge of today's manufacturing technology; the kit also contains an instruction handbook, a set of Brembo decals, and a series of practical temperature stickers as used in race conditions to monitor the working temperature of the calipers. The stickers clearly identify the thoroughbred race pedigree of the brakes.

To assure that we send you the correct spacers, please let us know the make, model and year of the bike that you plan on putting these calipers on.

Retail - $1718
Sale Price $1389.95 - < BREMBO PRICING >
Price Includes Brembo PADS.
 

The floating rotors were developed specifically to provide owners of Japanese Sportbikes (HONDA, YAMAHA, SUZUKI, KAWASAKI) with the maximum performance levels on the street and on the track. The new rotors are available in three diameters and are of greater thickness than standard rotors. The braking surface features a series of drilled holes to maximize performance and control when braking while simultaneously reducing rotating mass with consequent advantages in terms of machine handling. The braking surface is connected to the carrier, which is machined from solid aluminum and is the product of a comprehensive FEM calculation procedure.  The connection is achieved by means of ten floating- type aluminum buttons, reflecting a strictly race style engineering project. The kit contains the two rotors, and a set of Brembo decals.
Retail - $669.95
Sale Price - $292.50/each Disc x 2