'11-'12 ZX-10: For Special Offers, follow us on Facebook: Click
>>
<< to become a Fan or Friend.
You could be one of our Lucky $30 HardRacing e-GIFT CARDS PRIZE WINNERS,
Each Week..
New Parts / Updated:
05-10-2012
We update these pages often.
Be sure to hit REFRESH on your browser, each time you check this page.
Or it may Not Show the new parts.
The All New PC V & Dyno Jet Quick
Shifters:
Featuring: State of the Art Technology
New Mapping methods,
Transfer and Auxiliary Data Port for Future Add-ons.
Get One Now, Before they are all on Back Order
OPTIONAL ACCESSORIES
AUTO TUNE DEVICES - for Self Mapping. PC V ON SALE - $279(IN
STOCK )
Dyno Jet Secondary Fuel Module >>
SFM << ON SALE - $219
IN STOCK Allows PCV to Control ALL 8 Injectors
The Quick Shifter Expansion Moduel (QEM) allows the Dynojet Quick Shifter sensor to be used with the Power
Commander V on bikes that have 8 INJECTORS. The Q.E.M. connects to the upper
injectors and then into the PCV. Once the sensor is attached you will have full
Quick Shifter functionality at the LOWEST COST POSSIBLE! TO PLACE ORDER For QEM click- >>
QEM
<<
The Dynojet Quick Shifter Sensors are compatible with USB Power
Commander ONLY and allow "full throttle, clutch-
less" upshifts. These high quality sensors provide fast, accurate and
reliable shifting in conjunction with the Power Commander. Sensors are
attached to the gear linkage and connect into the Power Commander expansion
port. All sensors include a Software utility which allows the user to adjust
the "Kill Time" and "Minimum RPM Shift Point" within the Power Commander
Control Center Software. "Please note these are
NOT Power Shifters. They do
NOT shift for you. They
allow "full throttle, clutch- less" upshifts, by cutting the Fuel
or Spark for a split second as you start to shift
with your foot..
Dyno Jet
PC V Quick Shifter:
ON SALE - $179(IN
STOCK
)
(Requires: SFM .)
More Information ->>
DynoJet
Quick Shifters <<
For more information,
please refer to the guide belo: Linkage Adapters ONLY Sold w/ Quick Shifters.(Not sold Separately)
Linear Sensors are universal..
Shift Rod Sensors require the gear linkage tie-rod to be modified. We are developing a
range of tie-rods for the popular models, as well as universal tie-rods that are
specifically designed to give maximum adjustment, allowing a combination of different M6
right hand and left hand male and female threads over a wide range of 160mm to 280mm. This
will allow easy installation on many models as well as some custom rear-set applications..
<-click
CBR1000RR Dyno Map, showing nearly 4 HP Gain, everywhere, With JUST the Ign.
Module changes.
Some bike have shown gains over 8 hp, in certain areas, by simply changing
the Ignition Timing.
Power Commander Ignition Module
An “Add-On”
Power Commander Ignition Module
for Power Commander USB’s,
are available NOW. These modules will plug directly into the PCIIIUSB’s expansion port and the
bike’s ignition coils. Dynojet
Ignition Modules
use the latest in “direct coil driver technology.” Both advancing and
retarding of the ignition timing at specific throttle postion and rpm combination will be
possible. In “Advanced Mode,” the tuner will be able to set the timing for each
cylinder individually.
When tuned correctly, the Ignition module has potential to make excellent HP
Gains Through out the RPM Range. The Ignition Module will Also
allow the User to increase his Rev. Limiter of the Bike, Enabling them to
Tap the Most power
possible from the engine.
(Note, this does require a signed waiver form) The
Power Commander Ignition
Module will be
available for popular sport bike models.
This does not apply to Harley Davidson model Power Commander USB’s, as they include
ignition timing adjustment ability as part of the base unit..
The Dynojet Ignition Module is an “add on” accessory for
select Power Commander III USB. It allows you to control and adjust the
ignition timing of your motorcycles’ engine.
The Dynojet Ignition Module is connected to the PCIII USB with it’s built in
expansion port link and communicates via a CAN interface. As in the case of
the Power Commander, the Dynojet Ignition Module uses OEM style connectors
to plug in-line of the stock ignition harness so no cutting or splicing is
required.
The Dynojet Ignition Module uses “direct coil driver technology” and allows
a high degree of timing adjustment. In the Power commander Control Center
Software the user is able to advance or retard the ignition curve up to 10
degrees based on throttle position and RPM. It is also possible to alter the
timing for each cylinder individually if necessary.
The Ignition Module comes standard
with no adjustments made in the map for the timing table. Due to different
states of tune, fuel quality, and engine modifications we found it is best
to leave the ignition timing stock for safety reasons.
On motorcycles that have eight injectors and were not previously able to
benefit from the use of the Dynojet Quick Shifter, the Ignition Module now
allows this functionality. The Dynojet Quick Shifter is connected to the
expansion port between the Ignition Module and the PCIIIusb. Regular Price - $361ON SALE -
ON SALE - $285
Buy it Now >>
DynoJet
Ignition Modules <<
Stock Gearing 525-17t & 525-39t
Brembo RCS19 Brake Mastercylinder w/ FOLDING Lever (RCS 19)
The revolutionary aspect of the Brembo RCS19 Brake Mastercylinder is the ability
to choose between the 19x18 and 19x20 configuration. If you have read about Brembo Master Cylinders, you will know what these numbers mean and that there is a trade-off
between the two pivot configurations. Not to say that either configuration is
bad, but the rider had to choose between varying degrees of feel and power. Now
the rider can change the configuration to suit their needs. No more
compromises!
Another unique aspect to the RCS19 is itcomes
with a microswitch for the brake.
For racers, the adjuster knob has been relocated to the same position as the
19x18 Billet Folding Brake Master Cylinder that is used by Valentino Rossi and
Nicky Hayden in MotoGP and WorldSuperBike. Two springs have been installed to
ensure constant contact between the lever and the pushrod to ensure a longer
lifespan.
The Brembo 19RCS brake master cylinder retains features that made Brembo the top brake
system manufacturer today including forged CNC-machined construction and a
folding lever that reduces crash damage. RCS19
Sale Price:
$329.95 (Order this Brembo MC on-line, and receive
Free EXPRESS Shipping )
IN STOCK
Ohlins
Forks
Part# FGRT817
SPECIAL BLOW OUT SALE
LIMITED QTY. IN STOCK
Brembo ZO4 Upgraded Pads for OEM Calipers
Sale Price$123-$231 >>
BREMBO <<
YOSHIMURA FENDER ELIMINATOR
KIT
These kits feature a
precision laser cut stainless bracket that tucks discreetly under the tail
section of the bike,
as well as a premium CNC machined light holder which houses 4 LED lights.
The light housing is anodized black and laser etched with Yoshimura's logo.
Completing the kit is an anodized aluminum license plate frame which
features a silk screened Yoshimura logo. 2011-2012 ZX10R Yoshimura FE Kit
SALE PRICE
- $117.95
2011-2012 ZX10R Yoshimura Fork Tube Caps
Allows for an additional 15mm in front
ride height.
• Retains stock compression and rebound adjusters.
• CNC machined from aircraft grade alloy
• Laser etched Yoshimura logo.
• Distinctive Yoshimura Magnasonian™ Finish
SALE PRICE
- $219.95
GALFER High Performance Brake PADS
>>
GALFER PADS <<
>> Puig Windscreens << From $67.95 + Dark Smoke Double Bubble - Ltd. Qty. IN
STOCK
Ohlins ALL NEW 30mm NIX Fork Cartridge Kits
&
FGR PRESSURIZED
>>
CARTRIDGE KITS
<<
LIMITED TIME ONLY...
PACKAGE DEAL 30mm Kit and TTX Shock (MKI).... Only - $2250
OR
PACKAGE DEAL 30mm Kit and TTX Shock (MKII)....
Only - $2295
Limited QTY. IN STOCK The new Road&Track 30 mm front fork cartridge kit from Öhlins is
based on experience gained from World Supersport and Superstock
Championships. It doesn’t matter if you are heading for a National
Roadracing title or if you are taking your bike to the local race track. The
NIX 30mm cartridge kit will give you loads of performance, stable damping
characteristics and fantastic comfort. Greater Surface Area translates into
more control, less negative pressure on the back side of the piston
virtually eliminating cavitation commonly found on other brands of cartridge
kits. These 30mm NIX Cartridge Kit has a unique design with compression
damping and adjuster on the left leg and rebound damping and adjuster on the
right leg –
i.e. all adjustments are on the TOP of the Forks Together, with the Spring
Pre-Load adjusters.
'11-'12 ZX-10R
TTX36 ( KA 036) Click >> Ohlins
Shock << Very Limited QTY.
IN STOCK.
LIMITED TIME ONLY... SUPER SALE PRICE
PACKAGE DEAL 30mm Kit and Shock.... Only - $2250
Don't take chances with a Flat, or leaking Tire which can
cause a crash or accident on your bike.
This system is very Easy to install. Takes only about 3-5 min.
installation
Completely Wireless.
>> Tire Pressure
Monitoring System (TMPS) <<
Worlds Lightest Weight High Definition Video Camera w/ GPS Mapping
Technology.
NOW, you can see where you where you Recorded your Video, and How Fast you
were going
Where you went, and What Altitude, ALL on the Same Screen, At the same
time. All from this Little Camera.
And soon to be release Blue Tooth Apps. to connect to your Android Mobile
Phone, and iPhone. >> Contour GPS HD
Video Camera <<
GPR Steering Damper
NO
Drilling required
>>
GPR
Steering Damper <<
Retail - $505
Sale Price - $
Click above
CURRENTLY VERY LIMITED
QTY.
IN STOCK BLACK or GOLD
Escort / Passport iQ Radar Detector / Laser Detector /
GPS Navigation,
All in one Device click >>
Passport iQ <<
>>
Motion Pro Revolver
Throttle Kit << The best way to improve throttle control, but throttle sensitivity
can be changed mechanically
to suit riding conditions and rider preferences to great advantage no matter
what your level of skill.
<<--Click TRUE HIGH INTENSITY DISCHARGE (H.I.D.) LIGHTS
XENON LIGHTS .. KITS Starting at Only - $69.95/each
Hotbodies Color Matched Undertails
>> Under Tails
<<
RACE TECH FORK SPRINGS - for OEM Forks
Race Tech manufactures precision high performance springs that have
a high stiffness to mass ration.
In other words; Race Tech Fork springs are lightweight for the their
partifuclar rate.
This requires the finest materials and processing.
Race Tech OEM Replacement Fork Springs - $105
RACE TECH SHOCK SPRINGS - for OEM Shock
Race Tech HP Springs have a high
stiffness-to-mass ratio. In other words; our springs are light weight
for their particular spring rate. This requires the finest materials and
processing. Shot-peened and pre-set so they cannot sack out. All Race
Tech HP Springs have the highest rate tolerences in the industry. These
are the finest springs in the world-guaranteed.
Race Tech OEM Replacement Shock Springs - $105
Race Techs original bolt-on fork valving system
for cartridge forks
Triples the flow area by putting valving control on the shim stack
instead of the overly restricted stock piston
Outstanding tunability, improved control, traction, plushness and
bottoming resistance
Includes complete instructions, Gold Valve pistons, valving charts, and
valving shims
Race Tech 20mm Gold Valve Fork Kit
for OEM FORKS - $149
The newest offering from the Brembo HP line. The M4 CAST Monobloc Caliper.
Designed with an entry level cost in mind... Using
CAST Alum.
Instead of Billet.
These calipers are of monoblock construction utilizing a unique gravity cast
procedure.
High temperature main seals plus dust seals allow for use on street or on
the track.
Caliper CAST ALUM. bodies are then CNC machined.
Brake pads made from sintered material so & are ideal for use in wet and dry
conditions.
Kit includes instruction manual with all information about fitting,
bleeding, maintenance and more. 108mm
M4 Cast Alum. Calipers
Retail - $1098(Except 07-08 R1)
Price Includes Brembo PADS.
Sale Price - $799.95/set
of 2 Calipers
To See More Information on BREMBO CALIPERS, ROTORS and MASTERCYLINDERS
>> BREMBO<<
Ohlins ALL NEW 30mm NIX Fork Cartridge Kits
&
FGR Pressurized Kits
>>
CARTRIDGE KITS
<<
Limited QTY. IN STOCK The new Road&Track 30 mm front fork cartridge kit from Öhlins is
based on experience gained from World Supersport and Superstock
Championships. It doesn’t matter if you are heading for a National
Roadracing title or if you are taking your bike to the local race track. The
NIX 30mm cartridge kit will give you loads of performance, stable damping
characteristics and fantastic comfort. Greater Surface Area translates into
more control, less negative pressure on the back side of the piston
virtually eliminating cavitation commonly found on other brands of cartridge
kits. These 30mm NIX Cartridge Kit has a unique design with compression
damping and adjuster on the left leg and rebound damping and adjuster on the
right leg –
i.e. all adjustments are on the TOP of the Forks Together, with the Spring
Pre-Load adjusters.
ALL NEW
Brembo "HP" BILLET Brake Calipers
(2 Piece Design) 4
Piston, 2 Pad Setup.
Designed very similar to
the "Racing" Monobloc Calipers.
But, at LESS then half the Cost.
EXCELLENT Upgrade and OEM Fit.
108mm Bolt-Hole Setup
for Most Japanese Sport Bikes, That have Radial Calipers Stock.
Brembo has developed a new caliper with radial attachments that is
interchangeable on the standard radial forks of maxisport class Japanese
machines (HONDA, YAMAHA, SUZUKI, KAWASAKI). With a caliper body machined
from solid metal, special attention was paid to achieving high braking power
and stiffness, utilizing technology derived
directly from race engineering. The product, which is supplied in kit form,
is equipped with sintered brake pads - at the cutting edge of today's
manufacturing technology; the kit also contains an instruction handbook, a
set of Brembo decals, and a series of practical temperature stickers as used
in race conditions to monitor the working temperature of the calipers. The
stickers clearly identify the thoroughbred race pedigree of the brakes.
To assure that we send you the correct spacers, please let us know the make,
model and year of the bike that you plan on putting these calipers on.
BREMBO REAR
HP CALIPER
Following the latest development in
Brembo’s high performance kits programme, which broadly extends the
product range still further, motorbike enthusiasts are now offered a
rear caliper and bracket kit interchangeable with the
majority of OE assemblies fitted to Japanese and European supersport
models. Machined entirely from billet, the caliper body is the outcome
of exhaustive FEM calculations that optimize weight and stiffness. The
caliper is supplied complete with sintered pads —
currently the top option available on the market. Special care has been
taken over the need to achieve optimum control of the braking
action, even in conditions of poor grip that could be caused by
reduction of rear wheel weight during the braking action. The kit is
compatible both with OE brake master cylinders and with OE discs fitted
to all main supersport bikes.
In the case of Japanese supersport bikes
(SUZUKI, YAMAHA, HONDA and KAWASAKI), the kit includes
an adapter bracket that drops the caliper below the rear axle — its
usual position on racing machines. This helps to lower the centre of
gravity of bike and rider.
Available for these Models ONLY
: '06-'07 CBR1000RR / '04-'05 CBR1000RR
'07-'08 GSX-R1000 / '08-'09 ZX-10 /
'06-'07 ZX-10 / '04-'05 ZX-10
'07-'08 R1 / '04-'06 R1
HP " BILLET"
REAR
Caliper
Retail - $850.95
Price Includes Brembo PADS.
Sale Price $759- <
BREMBO PRICING >
The
floating rotors were developed specifically to provide owners of
Japanese Sportbikes (HONDA, YAMAHA, SUZUKI, KAWASAKI) with the
maximum performance levels on the street and on the track. The
new rotors are available in three diameters and are of greater
thickness than standard rotors. The braking surface features a
series of drilled holes to maximize performance and control when
braking while simultaneously reducing rotating mass with
consequent advantages in terms of machine handling. The braking
surface is connected to the carrier, which is machined from
solid aluminum and is the product of a comprehensive FEM
calculation procedure. The connection is achieved by means of
ten floating- type aluminum buttons, reflecting a strictly race
style engineering project. The kit contains the two rotors, and
a set of Brembo decals.
Retail - $669.95 Sale Price -
$292.50/each Disc x 2
-
< BREMBO PRICING >
TruGel Batteries The Ultimate LONG Lasting Top Quality
Motorcycle Battery. PERIOD.
And Best of All, They are LESS Cost then traditional Lead/acid batteries
Starlane Digital Gear Indicator
w/ Integrated Shift Light
Run ALL NEW Drag Race
Simulator for Dyno Jet LCD Screen
-
-DYNO JET
LCD DISPLAY
-
- DYNO JET Mult-Function
Hub -
Want To SEE What your bike, and
Power Commander are Doing WITHOUT A COMPUTER.
Do you Want to Switch MAPS on the Fly, or see what gear you are in, or See
what your fuel load is?
Do you want to tweak your map away from your house. Then you want a
Dyno Jet LCD Display.
UNIT
Plugs Directly into Your Power Commander IIIusb. Allows you to
View Maps, Current Speed, Gear Position, RPM, TPS and Much More
Can also Mtn. ON BIKE, in place of Gauges
(On some Bikes)
Click here for More Details
>> LCD DISPLAY
<<
LTD. QTY.
Starlane GPS Lap Timer
w/
Speedometer and RPM Pickup
>> Starlane GPS Lap Timers
<< GPS (Satellite) Technology.
NO Transponder Need. Imagine, No More worrying about setup .Transponders on the
side of the track each time you go out, or
Each time you come in. Those days are done.
Just go out on the track, Set the Start/Finish Line and the GPS (Satellites) Does it all for you. Current Speed, Lap Times, RPM;s, Max Speed, Fastest lap.....and
much more.
You can even Save each track, in memory. NO Wire Splicing, or
taping necessary.
This Unit
Easily transfers from bike to bike. Or you can put it in your car, or
truck, or SUV.
Very handy device.
TYPE R - With TRACK MAPPING. Downloaded to your
PC or Laptop
ALL NEW
Brembo "HP" BILLET Brake Calipers
(2 Piece Design) 4
Piston, 2 Pad Setup.
Designed very similar to
the "Racing" Monobloc Calipers.
But, at LESS then half the Cost.
EXCELLENT Upgrade and OEM Fit.
108mm Bolt-Hole Setup
for Most Japanese Sport Bikes, That have Radial Calipers Stock.
Brembo has developed a new caliper with radial attachments that is
interchangeable on the standard radial forks of maxisport class Japanese
machines (HONDA, YAMAHA, SUZUKI, KAWASAKI). With a caliper body machined
from solid metal, special attention was paid to achieving high braking power
and stiffness, utilizing technology derived
directly from race engineering. The product, which is supplied in kit form,
is equipped with sintered brake pads - at the cutting edge of today's
manufacturing technology; the kit also contains an instruction handbook, a
set of Brembo decals, and a series of practical temperature stickers as used
in race conditions to monitor the working temperature of the calipers. The
stickers clearly identify the thoroughbred race pedigree of the brakes.
To assure that we send you the correct spacers, please let us know the make,
model and year of the bike that you plan on putting these calipers on.
Retail - $1718
Sale Price $1389.95- <
BREMBO PRICING >
Price Includes Brembo PADS.
The
floating rotors were developed specifically to provide owners of
Japanese Sportbikes (HONDA, YAMAHA, SUZUKI, KAWASAKI) with the
maximum performance levels on the street and on the track. The
new rotors are available in three diameters and are of greater
thickness than standard rotors. The braking surface features a
series of drilled holes to maximize performance and control when
braking while simultaneously reducing rotating mass with
consequent advantages in terms of machine handling. The braking
surface is connected to the carrier, which is machined from
solid aluminum and is the product of a comprehensive FEM
calculation procedure. The connection is achieved by means of
ten floating- type aluminum buttons, reflecting a strictly race
style engineering project. The kit contains the two rotors, and
a set of Brembo decals.
Retail - $669.95 Sale Price -
$292.50/each Disc x 2
PIG Spotter Mirrors w/ LED Turn Signals These are the Ultimate Mirrors made from Billet Aluminum with
Convex Lens Offered in: Black / Polished / Chrome
> PIG Spotters <
<-Actual
Light2006
Shown for display purposes only
Clear LED Tail Lights
w/ Optional Integrated LED Signals
Unlike our Competitors, who sell Just a Circuit Board,
and require you to tear appart your entire Tail Light.....
We sell only the COMPLETE Tail Light Housing.
Just pop out your stock Tail Light, and Insert this one. OEM Plug for Tail Light.
NOTE: (TAIL Light come with Turn signal
option.
You don't Have to use them, if you don't want to. But, they are included in
the price.)
CHECK YOUR BIKES SPECIAL PAGE OFTEN....... WE ARE ALWAYS
UPDATING AS SOON AS NEW PARTS BECOME AVAILABLE.
Call (704-799-2192) or E-Mail Us.
Each Year, when the “ALL NEW”
models are released it takes anywhere from
2 weeks up
to 4 months for new parts to get released to the public.
The Parts Manufacturer’s
have to get the bikes, make the prototypes. Test the protype.
If it works correctly, then they Manufacturer volumes, and then get them to the
dealers.
This takes time. It’s just part of life.
Meanwhile, customers like yourself, are anxiously waiting to get the newest
and coolest products… NOW.
And each year, many of you will wait until the product
is released to order it.
But, by the time the product is released, the demand far exceeds the supply.
Meaning 100
customers want Product X, but only 30
units arrive in the first shipment to the U.S. So, that means 70 customers have to wait another 2-4 weeks
for more product to become available.
Because Soo many others have already placed their orders, you have to wait
even longer to get yours.
Well, there is a way to fix that.
This
year we are encouraging our customers to order early.
There is absolutely, NO RISK. NON AT ALL.
We will NOT Charge your credit card until the product is ready to ship
to you. PERIOD.
NO Deposit, NO Cancellation Fee’s, NO BS.
And you may cancel your
order at anytime. We have no problem with that.
The demand for these new parts is soo high, if you cancel, we just go down the
list,
and make the next customer the happiest man in town.
So, you have Nothing to
lose… and soo much to gain.
The sooner you put your
order in for a new part, the higher up on the list you get.
That way, when the new part gets released, you get first dibbs over everyone
else.
It doesn’t matter if there is a price yet or a even a
part number.
Just tell us what bike, and what part, and Your Order is LOCKED.
PERIOD. It's that easy.
We will call you the day the part is ready to ship, and give you final decision
if you still want it.
If you say “YES”…. we will ship it immediately.
If you say “NO”, we will cancel the order and move down the list to the next
customer.
NOTHING TO LOSE……… Yet Soo much to gain.
Don’t wait till the last
minute. If you have a part you want to order, CALL US
now or >Order On-Line<
ONE MORE TIME….. DON’T WAIT.
You know the saying, “You snooze, You lose”.
** Please note,
the No cancellation fee ONLY applies to "ALL NEW" Parts that have not been
released yet.
It does NOT apply to
"Special Order Parts" that have already been released to the public and are no
longer in demand.
<< to become a Fan or Friend. 
The
floating rotors were developed specifically to provide owners of
Japanese Sportbikes (HONDA, YAMAHA, SUZUKI, KAWASAKI) with the
maximum performance levels on the street and on the track. The
new rotors are available in three diameters and are of greater
thickness than standard rotors. The braking surface features a
series of drilled holes to maximize performance and control when
braking while simultaneously reducing rotating mass with
consequent advantages in terms of machine handling. The braking
surface is connected to the carrier, which is machined from
solid aluminum and is the product of a comprehensive FEM
calculation procedure. The connection is achieved by means of
ten floating- type aluminum buttons, reflecting a strictly race
style engineering project. The kit contains the two rotors, and
a set of Brembo decals.
$ 
2006
Shown for display purposes only
