The All New PC V  &  Dyno Jet Quick Shifters:
Featuring: State of the Art Technology
New Mapping methods, 
Transfer and Auxiliary Data Port for Future Add-ons.
Get One Now, Before they are all on Back Order
OPTIONAL ACCESSORIES
AUTO TUNE DEVICES - for Self Mapping. 

PC V   ON SALE - $269   IN STOCK,  Ltd. Qty.
For More Details: & Buy It Now >> DynoJet Power Commanders   PC V  <<

Click here to see INSTALLATION VIDEO  >>  INSTALL PC V <<

Dyno Jet Secondary Fuel Module >> SFM <<
ON SALE - $219
Allows PCV to control ALL 8 Injectors

 

The Quick Shifter Expansion Moduel (QEM) allows the Dynojet Quick Shifter sensor to be used with the Power Commander V on bikes that have 8 INJECTORS. The Q.E.M. connects to the upper injectors and then into the PCV. Once the sensor is attached you will have full Quick Shifter functionality at the LOWEST COST POSSIBLE!
 
TO PLACE ORDER For QEM  click- >> QEM  <<

Auto Tune for Power Commander V
“Auto Tune” kits are available that include Wide Band O2 sensors and control boxes. It will plug directly into the PCV and allow automatic fuel adjustments.  Auto Tune can make a map for each gear it can map each cylinder separately for each gear if needed. (basic settings would make one map for all gears)  “Warm Up” fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on it)  Each map cell is individually adjustable so you can specify an exact AFR value for each area if needed. This allows the tuner/user to select specific AFR targets for idle, cruise, and large throttle opening areas. By doing this you can automatically tune the cruise area for best fuel economy while at the same time achieve maximum power at wide open throttle.
If Dyno Jet does not have the exact map for your combination of parts you simply need to choose the closest one and let the Auto Tune kit do the rest.
(if you have an very heavily modified engine and/or short drag pipes verifying your settings on a dynamometer is recommended).

SPORT BIKE AUTO TUNE KITS  Retail :  $250    OUR SALE PRICE - $209  

 

       

For more information, please refer to the guide belo: Linkage Adapters ONLY Sold w/ Quick Shifters.(Not sold Separately)

Linear Sensors  are universal..
Shift Rod Sensors require the gear linkage tie-rod to be modified. We are developing a range of tie-rods for the popular models, as well as universal tie-rods that are specifically designed to give maximum adjustment, allowing a combination of different M6 right hand and left hand male and female threads over a wide range of 160mm to 280mm. This will allow easy installation on many models as well as some custom rear-set applications..

    <-click
CBR1000RR Dyno Map, showing nearly 4 HP Gain, everywhere, With JUST the Ign. Module changes.
Some bike have shown gains over 8 hp, in certain areas, by simply changing the Ignition Timing.

Power Commander Ignition Module    
 

An “Add-On” Power Commander Ignition Module for Power Commander V ’s, are available NOW.
These modules will plug directly into the PC V’s expansion port and the bike’s ignition coils. Dynojet Ignition Modules use the latest in “direct coil driver technology.” Both advancing and retarding of the ignition timing at specific throttle postion and rpm combination will be possible. In “Advanced Mode,” the tuner will be able to set the timing for each cylinder individually.
When tuned correctly, the Ignition module has potential to make excellent HP Gains Through out the RPM Range.
The Ignition Module will Also allow the User to increase his Rev. Limiter of the Bike, Enabling them to Tap the Most power
possible from the engine. (Note, this does require a signed waiver form)
The Power Commander Ignition Module will be available for popular sport bike models. 
This does not apply to Harley Davidson model Power Commander USB’s, as they include ignition timing adjustment ability as part of the base unit..

The Dynojet Ignition Module is an “add on” accessory for select Power Commander V . It allows you to control and adjust the ignition timing of your motorcycles’ engine.

The Dynojet Ignition Module is connected to the PC V with it’s built in expansion port link and communicates via a CAN interface. As in the case of the Power Commander, the Dynojet Ignition Module uses OEM style connectors to plug in-line of the stock ignition harness so no cutting or splicing is required.

The Dynojet Ignition Module uses “direct coil driver technology” and allows a high degree of timing adjustment. In the Power commander Control Center Software the user is able to advance or retard the ignition curve up to 10 degrees based on throttle position and RPM. It is also possible to alter the timing for each cylinder individually if necessary.
 

 The Ignition Module comes standard with no adjustments made in the map for the timing table. Due to different states of tune, fuel quality, and engine modifications we found it is best to leave the ignition timing stock for safety reasons.

On motorcycles that have eight injectors and were not previously able to benefit from the use of the Dynojet Quick Shifter, the Ignition Module now allows this functionality. The Dynojet Quick Shifter is connected to the expansion port between the Ignition Module and the PC V
 Regular Price - $361  ON SALE  $285
Buy it Now >> DynoJet Ignition Modules  <<

Brembo RCS19  Brake Mastercylinder w/ FOLDING Lever

Brembo ZO4 Upgraded Pads for OEM Calipers
Sale Price $123-$231
>> BREMBO <<
 

Anti-Gravity SuperLight
 Lithium Batteries






Full Spectrum Power Ultra Light Weight 
"Pulse"  P1, P2, P3 Lithium. Batteries

 

Worlds Lightest Weight High Definition Video Camera w/ GPS Mapping Technology.
NOW, you can see where you where you Recorded your Video, and How Fast you were going
Where you went,  and What Altitude, ALL on the Same Screen, At the same time. All from this Little Camera.
And soon to be release Blue Tooth Apps. to connect to your Android Mobile Phone, and  iPhone.
 >> Contour GPS  HD Video Camera <<

Escort / Passport iQ  Radar Detector / Laser Detector / GPS Navigation,
All in one Device   click >> Passport iQ <<

>> Carrozzeria Forged Aluminum Wheels <<
Starting at only - $1689

KOSO Gauges
RX-1N  /  RX-2  /  RX-2N




 

-  DRIVEN CLip-ons -

>> TWO BROTHERS ALUMINUM RACING STANDS <<




 

2009-2011 ZX6R  Yoshimura Fender Eliminator Kit
SALE PRICE - $117.95 

              <<--Click
TRUE HIGH INTENSITY DISCHARGE (H.I.D.) LIGHTS
XENON LIGHTS .. KITS Starting at Only - $79.95/each

>> HID LIGHT CONVERSION KITS <<

BREMBO RSC  Kawasaki Replacement Cable Clutch Lever
Mechanical clutch lever assembly machined entirely from billet. Lever boss has special geometry. Plug-and-play design ensures the lever can mount directly to the original arm lever assembly. Similar in all respects to the 19RCS Master Cylinder with laser-imprinted Brembo® Racing logo and the famous tri-color flag on the lever boss.  Perfect Match for your RCS19 Brake
RSC  Kawasaki Cable Clutch Lever   Sale Price: $149.95      
 

Shogun Crash Kits
Kits Include:  (Frame Sliders, Bar ends Sliders, & Swing Arm Spool/Sliders)
>>  Crash Kits  <<
 

GoPRO HERO2   High Definition HD  Camera Kit

Ohlins ALL NEW 30mm NIX Fork Cartridge Kits
&
FGR PRESSURIZED
>> CARTRIDGE KITS <<
LIMITED TIME ONLY... SUPER SALE PRICE
PACKAGE DEAL  30mm Kit and Shock.... Only - $2250
Limited QTY.  IN STOCK
The new Road&Track 30 mm front fork cartridge kit from Öhlins is based on experience gained from World Supersport and Superstock Championships. It doesn’t matter if you are heading for a National Roadracing title or if you are taking your bike to the local race track. The NIX 30mm cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.  Greater Surface Area translates into more control, less negative pressure on the back side of the piston virtually eliminating cavitation commonly found on other brands of cartridge kits.  These 30mm NIX Cartridge  Kit has a unique design with compression damping and adjuster on the left leg and rebound damping and adjuster on the right leg –
i.e. all adjustments are on the TOP of the Forks Together, with the Spring Pre-Load adjusters.

 

 >> UNIVERSAL Dyno Jet Ign. QuickShifter Controller Box  <<
IN STOCK, Very Limited QTY.
 
 

Ohlins Steering Damper
STOCK Mtn. (SD-021)

OHLINS UPGRADE  REPLACEMENT DAMPER
ALL new Design Magnesium Color Body, and LASER Etched Ohlins Logo.
THIS ALL NEW OHLINS Damper also has ALL NEW Mechanical Reservoir built in  which keeps Oil Pressure at a constant Rate While the Fluid expands and contracts.  This keeps the Damper Consistent Feel, ALL the time.

RACE TECH FORK SPRINGS - for OEM Forks


Race Tech manufactures precision high performance springs that have a high stiffness to mass ration.
In other words; Race Tech Fork springs are lightweight for the their partifuclar rate.
This requires the finest materials and processing.
Race Tech OEM Replacement Fork Springs - $105 

RACE TECH SHOCK SPRINGS - for OEM Shock


Race Tech HP Springs have a high stiffness-to-mass ratio. In other words; our springs are light weight for their particular spring rate. This requires the finest materials and processing. Shot-peened and pre-set so they cannot sack out. All Race Tech HP Springs have the highest rate tolerences in the industry. These are the finest springs in the world-guaranteed.
Race Tech OEM Replacement Shock Springs - $105 

Race Tech 20mm GOLD VALVE FORK KIT FMGV2040  for OEM Forks


Race Techs original bolt-on fork valving system for cartridge forks
Triples the flow area by putting valving control on the shim stack instead of the overly restricted stock piston
Outstanding tunability, improved control, traction, plushness and bottoming resistance
Includes complete instructions, Gold Valve pistons, valving charts, and valving shims
Race Tech 20mm Gold Valve Fork Kit  for OEM FORKS  - $149 
 

 >> Werkes USA Slip-ons <<
'09-'10   ZX-6R    SS Slip-on

>> DRIVEN AXLE BLOCK SLIDERS <<
 

 >> OHLINS FORK SPRINGS <<
(Upgrade Replacement for OEM Forks)

Ohlins Shock Springs  for Ohlins SHOCKS

Replacement Springs for your Ohlins Shock. 
Springs Rates available from 70N/mm up to 135N/mm
Sale Price - $89
  IN STOCK  

Barnett Clutch Packs
Packs include Steel Plates and Fiber Plates. 
Each pack is  - BIKE SPECIFIC. 
SALE PRICE - Starting @ $133 + Up    
 

TruGel Batteries
The Ultimate LONG Lasting Top Quality Motorcycle Battery.  PERIOD.
And Best of All, They are LESS Cost then traditional Lead/acid batteries

SPEEDO - TUNER - CALIBRATOR
 

ALL NEW  Brembo "M4"  CAST
MONOBLOC FRONT CALIPERS


The newest offering from the Brembo HP line. The M4 CAST Monobloc Caliper.
Designed with an entry level cost in mind... Using CAST Alum. Instead of Billet.
These calipers are of monoblock construction utilizing a unique gravity cast procedure.
High temperature main seals plus dust seals allow for use on street or on the track.
Caliper CAST ALUM. bodies are then CNC machined.
Brake pads made from sintered material so & are ideal for use in wet and dry conditions.
Kit includes instruction manual with all information about fitting, bleeding, maintenance and more.
108mm M4 Cast Alum. Calipers    Retail - $1098  (Except 07-08 R1)
Price Includes Brembo PADS. 
Sale Price - $799.95/set of 2 Calipers  
To See More Information on BREMBO CALIPERS, ROTORS and MASTERCYLINDERS >> BREMBO<<


 

BMC High Flow Air Filters
IN STOCK

  
CRG Levers are Carved from aluminum.
They are beautiful as well as functional.
CRG Levers are Designed to be bolt on replacements, fully adjustable.
Available in Gold or Gray. 
A few Select CRG Levers are available in a short lever version. ( 1.25" Shorter )
Learn More or Buy Now >  CRG Levers <    - $84.95 & Up   

 

OHLINS "R&T"  BPF Complete Fork Cartridge Kit

This kit is The equivalant of a Set of Ohlins Forks,
Less the Sliders, and Bottoms.
Everything INSIDE a Set of Ohlins RT Forks, comes in this Kit.

Specially designed for the BIG PISTON FORKS Design

• Includes Complete Internal Cartridge
NEW Compression Pistons,
NEW Rebound Pistons
NEW  Piston Rings
NEW Shims
Complete Set of One-Way Valves,
NEW Washers
Recommended Track Settings
External rebound Damping
 External compression Damping
External Spring preload adjusters
Works with STOCK Fork sliders and bottoms, so it's SuperSport Legal
In nearly all regions.

>> OHLINS  <<

 
Pro Rails / Crash Protector Bars

<-Actual Light     2006 Shown for display purposes only
'09-'10 ZX-6R  /  '08-'09 ZX-10R  /   '07-'08 Z1000
 Clear LED Tail Lights   w/ Optional  Integrated  LED Signals
   (CTL-0108-IT)   Only - $149.95    IN STOCK   
 
Unlike our Competitors, who sell Just a Circuit Board,
and require you to tear appart your entire Tail Light.....
We sell only the COMPLETE Tail Light Housing.
Just pop out your stock Tail Light, and Insert this one. OEM Plug for Tail Light.
NOTE: (TAIL Light come with Turn signal option. 
You don't Have to use them, if you don't want to.  But, they are included in the price.)

   
ZX-6R
These Signals are a Direct replacement of stock OEM turn signals for 2005 ZX636/6RR
No drilling, cutting, or other modifications needed. Turn signals are sold in pairs (2 per pack) bulbs included... These front "EURO STYLE" turn signals are molded into the shape of the fairing for an aerodynamic and a trick look.
Simple & easy to install, they will mount into the stock location in just few minutes.
Unlike Our Competitors,  OUR FRONT Signals ARE DOT LEGAL.
"Euro Style" Front Signals - CLEAR or SMOKE
CTS-0048 (Clear)  - $69.99 IN STOCK 
CTS-0048s (Smoke)  - $69.99 IN STOCK  

 
 HOTBODIES COLOR MATCHED UNDERTAILS and HUGGERS
AVAILABLE NOW

Hotbodies Color Matched Rear Huggers, and VENTED Front Fenders
>>  HOTBODIES <<
 

Gilles Rear Sets - 
 

ALL  NEW "CZ" Canister

>> Akrapovic Exhausts <<
SAME As Roger Lee, and Jamie Hacking Use on FACTORY KAWASAKI RACE TEAM
Slip-ons & Systems  - IN STOCK, Very Ltd. Qty.
 

'09-'10  ZX6-R  Fender Eliminator Kit
1K608   - $139.95         $114.95 
Includes Solid Mtn. Tag Bracket, and New Turn Signals and  LED Tag Light  
      (Exactly As Shown)
 

'09-'10  ZX6-R  Fender Eliminator Kit  LTD
1K608LTD   - $149.95         $124.95 
Includes PIVOT Mount Tag Bracket, Cover Plate and New Turn Signals and  LED Tag Light  
      (Exactly As Shown)

 

>> TWO BROTHERS <<

Vortex Full Adjustable Rear Sets    
Retail - $409  starting at Sale Price - $299
NOW Available in BLACK OR SILVER  OR GOLD
 



 

GALFER SS BRAKE LINE KITS ($59- $131)  
IN STOCK


 

>> K Tech Shocks and Cartridge Kits  <<

>> SharkSkinz Racing Bodywork <<
  

ZX-6R Puig Windscreens 
(CLEAR, DRK. SMOKE )    
From $67.95 + Up  

 

OHLINS "R&T"  Complete Fork Cartridge Kit

This kit is The equivalant of a Set of Ohlins Forks,
Less the Sliders, and Bottoms.
Everything INSIDE a Set of Ohlins RT Forks, comes in this Kit.

• Includes Complete Internal Cartridge
NEW Compression Pistons,
NEW Rebound Pistons
NEW  Piston Rings
NEW Shims
Complete Set of One-Way Valves,
NEW Washers
NEW 25mm Fork Springs
Recommended Track Settings
External rebound Damping
 External compression Damping
External Spring preload adjusters
Same 25mm Fork Springs that are on the R&T Forks
Works with STOCK Fork sliders and bottoms, so it's SuperSport Legal
In nearly all regions.

BLOW OUT SALE PRICE - $1179
>> 25mm Cartridge Kits <<
While Supplies Last.
 

   
 
KR TUNED
Slip-ons and Full Systems

ALL NEW   HARD RACING.com T-SHIRTS
Dyno Jet, Brembo, Yoshimura Logo on one sleeve
And
Akrapovic, Alpinestars, Ohlins Logo on the other sleeve.

 HARDRACING.com    T-Shirts  &  DECALS
T-SHIRTS ONLY - $5.95  
&   
HARD RACING.com DECALS -   $0.95
(Not quite Bike Specific, But they do work with all bikes)

 

VORTEX   
NO CUT, offset brackets 
 

Gilles Rear Sets  

SPEEDO - TUNER - CALIBRATOR
 

    Woodcraft Case Covers
 Starting at only - $98  
 

Scotts Steering Damper
Complete bolt-on kit.  
 

Vortex Mirror Block Off Plates

 

BAZZAZ PERFORMANCE
Z-FI  &    Z-FI Quick Shifters 
Z-FI TC (Traction Control)
LTD QTY.... IN STOCK
 

ALL NEW
Brembo "HP" BILLET Brake Calipers  (2 Piece Design)
4 Piston,  2 Pad Setup.
Designed very similar to
the "Racing" Monobloc Calipers.
But, at LESS then half the Cost.
EXCELLENT Upgrade and OEM Fit.
108mm  Bolt-Hole Setup
for Most Japanese Sport Bikes, That have Radial Calipers Stock.
Brembo has developed a new caliper with radial attachments that is interchangeable on the standard radial forks of maxisport class Japanese machines (HONDA, YAMAHA, SUZUKI, KAWASAKI). With a caliper body machined from solid metal, special attention was paid to achieving high braking power and stiffness, utilizing technology derived directly from race engineering. The product, which is supplied in kit form, is equipped with sintered brake pads - at the cutting edge of today's manufacturing technology; the kit also contains an instruction handbook, a set of Brembo decals, and a series of practical temperature stickers as used in race conditions to monitor the working temperature of the calipers. The stickers clearly identify the thoroughbred race pedigree of the brakes.

To assure that we send you the correct spacers, please let us know the make, model and year of the bike that you plan on putting these calipers on.

Retail - $1718
Sale Price $1389.95- < BREMBO PRICING >
Price Includes Brembo PADS.
 

The floating rotors were developed specifically to provide owners of Japanese Sportbikes (HONDA, YAMAHA, SUZUKI, KAWASAKI) with the maximum performance levels on the street and on the track. The new rotors are available in three diameters and are of greater thickness than standard rotors. The braking surface features a series of drilled holes to maximize performance and control when braking while simultaneously reducing rotating mass with consequent advantages in terms of machine handling. The braking surface is connected to the carrier, which is machined from solid aluminum and is the product of a comprehensive FEM calculation procedure.  The connection is achieved by means of ten floating- type aluminum buttons, reflecting a strictly race style engineering project. The kit contains the two rotors, and a set of Brembo decals.
Retail - $669.95
Sale Price - $292.50/each Disc x 2
 < BREMBO PRICING >
 

Slip-ons and Full Systems
>> Yoshimura <<

  TTX36 (KA889)
 Click >>  Ohlins Shock  <<
IN STOCK

Ohlins SUPERSPORT FORK  VALVE  KIT
"Compression & Rebound Valves"
(For use with STOCK FORKS)

• Kit Improves Comfort & Performance of Stock Forks
• Includes NEW Compression Pistons,
Rebound Pistons, Piston Rings,
Shims, One-Way Valves, Washers, and
Recommended Track Settings
• Bolt-On Installation For ALL Stock Forks
• Recommended For "STREET or RACE"
3200-01 / FPK-xxx -   IN STOCK   
Ohlins  

 >> LEO VINCE <<
Slip-ons and Systems

           Sato Rear Sets - (Gold, Silver, Black)
 

  
"The Future of Performance."
>> M4 Exhaust <<

 

- YOSHIMURA - 
 

>> Jardine Performance Exhausts <<

 

BREMBO Mastercylinders - $260 + Up  IN STOCK

Starlane Digital Gear Indicator
w/ Integrated Shift Light

Starlane Digital Gear Inditcator

 HOTBODIES COLOR MATCHED UNDERTAILS and HUGGERS
AVAILABLE NOW

Starlane  GPS  Lap Timer  w/ Speedometer and RPM Pickup

>> Starlane GPS Lap Timers  <<
GPS (Satellite) Technology.   NO Transponder Need.
Imagine, No More worrying about setup .Transponders on the side of the track each time you go out, or
Each time you come in.  Those days are done. 
Just go out on the track, Set the Start/Finish Line and the GPS (Satellites) Does it all for you.
Current Speed, Lap Times, RPM;s, Max Speed, Fastest lap.....and much more.
You can even Save each track, in memory.  NO Wire Splicing, or taping necessary.
This Unit Easily transfers from bike to bike.  Or you can put it in your car, or truck, or SUV.
Very handy device. 

TYPE R  - With TRACK MAPPING.  Downloaded to your PC or Laptop

>> GPR Steering Damper  <<
Retail - $500 Sale Price - $  Click  GPR  for Sale Price
 

  VORTEX Race Stands 
Folds For Easy Storage/Travel

     
     
Run ALL NEW Drag Race Simulator for Dyno Jet LCD Screen

-
- DYNO JET  LCD DISPLAY -     - DYNO JET  Mult-Function Hub - 
Want  To SEE What your bike, and Power Commander are Doing WITHOUT A COMPUTER.
Do you Want to Switch MAPS on the Fly, or see what gear you are in, or See what your fuel load is?
Do you want to tweak your map away from your house.  Then you want a Dyno Jet LCD Display.
UNIT Plugs Directly into Your Power Commander IIIusb.  Allows you to View Maps, Current Speed, Gear Position, RPM, TPS and Much More Can also Mtn. ON BIKE, in place of Gauges (On some Bikes)
  Click here for More Details     >>  LCD DISPLAY  <<
LTD. QTY.  IN STOCK

SCORPIO ALARMS
w/ FM PAGER Remote

Hyper-White Xenon Bulbs - $29.95 IN STOCK  ( R1  Requires 2 Sets of H7's)
(Similar to New BMW/Mercedes Lights)

Helmet/Bike Camera & Digital Video Recorder (DVR) & MP3 Player
w/ LCD Screen
Complete Kit
LTD. QTY.  IN STOCK

   
           Starlane Digital Dash      Optional GPS Receiver Offering Track Mapping

ALL NEW   HARD RACING.com T-SHIRTS
Dyno Jet, Brembo, Yoshimura Logo on one sleeve
And
Akrapovic, Alpinestars, Ohlins Logo on the other sleeve.

 HARDRACING.com    T-Shirts  &  DECALS
T-SHIRTS ONLY - $5.95  
&   
HARD RACING.com DECALS -   $0.95
(Not quite Bike Specific, But they do work with all bikes)

 

Chickehawk Tire Warmers - 
IN STOCK  
ON SALE... $399 +  Up





 

 
>> Pro Bolts and Fastener Kits <<

Chain Kits/Sprockets ($165 +) 
 

Michelin PILOT POWER
& POWER RACE
Starting From - $109
  IN STOCK

 

Wide Band Commander
A/R Fuel Monitor    IN STOCK
Retail - $550    ON SALE  - $428
 

Chicken-Hawk Tire Warmers
$399 - $625  IN STOCK

Scotts Performance
Stainless Steel Oil Filters
IN STOCK

Vortex Clip-Ons - $119.95  

 

COMING SOON

BREMBO REAR HP CALIPER
Following the latest development in Brembo’s high performance kits programme, which broadly extends the product range still further, motorbike enthusiasts are now offered a rear caliper and bracket kit interchangeable with the majority of OE assemblies fitted to Japanese and European supersport models. Machined entirely from billet, the caliper body is the outcome of exhaustive FEM calculations that optimize weight and stiffness. The caliper is supplied complete with sintered pads — currently the top option available on the market. Special care has been taken over the need to achieve optimum control of the braking action, even in conditions of poor grip that could be caused by reduction of rear wheel weight during the braking action. The kit is compatible both with OE brake master cylinders and with OE discs fitted to all main supersport bikes.
In the case of Japanese supersport bikes (SUZUKI, YAMAHA, HONDA and KAWASAKI), the kit includes an adapter bracket that drops the caliper below the rear axle — its usual position on racing machines. This helps to lower the centre of gravity of bike and rider.

Available for these Models ONLY :  '06-'07 CBR1000RR / '04-'05 CBR1000RR 
'07-'08 GSX-R1000   /   '08-'09 ZX-10  /  '06-'07 ZX-10  /  '04-'05 ZX-10
'07-'08 R1  / '04-'06 R1
HP " BILLET" REAR Caliper    Retail - $850.95
Price Includes Brembo PADS. 
Sale Price $759 - < BREMBO PRICING >
  

 

   
VORTEX Upper Fairing Stay (Race use ONLY)
$149.95